im in need of a trigger assembly, but cant find one. I called savage and they told me they have them for 17 bucks but it is a gunsmith only part. called my gun dealer and he told me it would be around $40 through him... so my question is can you explain what the sear and yoke are on this rifle? I can find those and I think those might be the parts I'm needing inside my trigger assembly.. thanks in advance...
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Savage 64 parts help!!
- Thread starter willy_g77
- Start date
I have done several trigger jobs on ruger 10-22's and built severl AR-15 and 1911's so I feel comfortable working on this rifle. its literly only 3 screws. I hate to spend $40 on a $100 gun. The factory diagram doesnt label either of these parts but rather the whole assembly, although gunpartscorp.com has a sear and yoke parts in stock but dont have a picture to confirm my reasoning. the parts im needing are a dissconnector/trigger reset and the sear. All I need to know if these parts could be called something else such as a yoke? if you dont know then please dont post comments like " take it to the gun smith"... its a simple job and just need parts. thanks.
The sear is the part that holds the firing pin back. The yoke could be part of a bolt hold open system or part of the trigger assembly, not sure.
You can get the sear and yoke here http://www.gunpartscorp.com/catalog/Products.aspx?catid=4516 but I would try to get the whole assembly from Savage. Just because it is a "gunsmith only part" usually means that you have to sweet talk somebody to get it sent to you.
Jimro
You can get the sear and yoke here http://www.gunpartscorp.com/catalog/Products.aspx?catid=4516 but I would try to get the whole assembly from Savage. Just because it is a "gunsmith only part" usually means that you have to sweet talk somebody to get it sent to you.
Jimro