Savage 110 AccuTrigger with Leupold STD mounts?

O

OSUCowboy

New member
I recently purchased a 4-12X40 scope for my Savage 110 .30-06, only to find that the scope tube is about 1/2 an inch too short to fit in the rings (the old scope was a 3-9X40 with a longer tube that just barely fit). I know that Leupold makes STD mounts with extension rings which offer about 1/2 an inch longer or shorter adjustment, but I can't find any bases that are made specifically for my rifle. Does anyone have any experience with the STD mounts (2-piece, not the 1-piece) on a Savage 110 post-AccuTrigger?
 
You may have to start over and use this style of base http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=199583&t=11082005 that is designed specifically for your gun and then use leupold weaver style rings. That will allow you to mount the rings closer together to fit the shorter tube of your scope.
I replaced the 3x9x40 scope and had the same problem mounting a 6.5x20x50 scope on my savage 110 w/accutrigger. To make it work with the shorter length of 1" diameter tube that is what I used.
 
I like 2 piece bases. If the 2 piece Leupold Weaver Style base is used on an accutrigger gun the bases are both round bottomed and are interchangable.

Concerning rings the best extension rings I found are Millet Weaver Style Rings which work well, though their adjustable windage is sometimes a bother.
 
You must log in or register to reply here.
Back
Top