I recently picked up a new model Ruger American Predator 223. It’s the 26944 model that uses the AR style magazines. Also with the newer model, Ruger has done away with the proprietary weaver/picatinny rail that had the odd spacing/size which limited some single piece scope mounts.
A couple positive first impressions. Owning a Ruger American in 7mm-08 that needed some stock work, the first thing I did was look at the fore end to see if there was contact between the pretty green plastic and the barrel. None! Both sides were evenly spaced off the barrel, and a dollar bill traveled easily up to the receiver. I also attached a Harris bipod and positioned the rifle for a shot to check and see if it cause the stock to flex and make contact. I did flex a hair, but never made contact with the barrel. So I assume Ruger did something to give a little more rigidity to the front end, and it worked. I consider that a great improvement considering the price didn’t go up.
It came with one magpul 10 rnd mag which is handled by the same hardware you would find on an AR. There’s plenty of room around it, which allows a little movement on the axis of the retention point. But this didn’t cause any accidental mag drops or any issues cycling.
I put a Nikon P223 Scope on it with the single piece Nikon rings that I had on my AR. It’s a little high, for a bolt action, but I’m tall, and have a tall head, so it works to get things started.
Despite the wind, I was able to take it out Saturday and get it zeroed and groundhog/coyote capable. I ran about 50 rounds of Federal American Eagle 55grain FMJBTs through it, then fine-tuned the last 10 with some Hornady 55 grn VMax. Eventually I'll snag some dies and work up a load with some ballistic silver-tips (but that will be a post for a different day). The target picture is the first 4 shots at 100 yds after I mounted and bore-sited the scope. To be fair, the scope stayed in the rings and the alignment from the AR was very helpful in a quick bore-site on the Ruger. I was plenty pleased with what this gun will do under less than range grade circumstances. After I was pleased with the paper at 100 yds, I shot a 6” gong at 200 yds. and 300 yds. I hit the 200 yd 10 for 10 (which at my level of shooting, is a great feeling). It was a windy day, and I’m still learning to overcome wind, especially with lighter bullets, so I hit the 300 yd target just 4 for 10. But I’ll keep at it.
The long and short of it is that I’m really pleased with this rifle, and I really feel like Ruger is onto something with their American. I would buy a couple more in a heart-beat to have them on hand. I think the 6.5 Grendel in the same model will be the next bolt gun purchase.
A couple positive first impressions. Owning a Ruger American in 7mm-08 that needed some stock work, the first thing I did was look at the fore end to see if there was contact between the pretty green plastic and the barrel. None! Both sides were evenly spaced off the barrel, and a dollar bill traveled easily up to the receiver. I also attached a Harris bipod and positioned the rifle for a shot to check and see if it cause the stock to flex and make contact. I did flex a hair, but never made contact with the barrel. So I assume Ruger did something to give a little more rigidity to the front end, and it worked. I consider that a great improvement considering the price didn’t go up.
It came with one magpul 10 rnd mag which is handled by the same hardware you would find on an AR. There’s plenty of room around it, which allows a little movement on the axis of the retention point. But this didn’t cause any accidental mag drops or any issues cycling.
I put a Nikon P223 Scope on it with the single piece Nikon rings that I had on my AR. It’s a little high, for a bolt action, but I’m tall, and have a tall head, so it works to get things started.
Despite the wind, I was able to take it out Saturday and get it zeroed and groundhog/coyote capable. I ran about 50 rounds of Federal American Eagle 55grain FMJBTs through it, then fine-tuned the last 10 with some Hornady 55 grn VMax. Eventually I'll snag some dies and work up a load with some ballistic silver-tips (but that will be a post for a different day). The target picture is the first 4 shots at 100 yds after I mounted and bore-sited the scope. To be fair, the scope stayed in the rings and the alignment from the AR was very helpful in a quick bore-site on the Ruger. I was plenty pleased with what this gun will do under less than range grade circumstances. After I was pleased with the paper at 100 yds, I shot a 6” gong at 200 yds. and 300 yds. I hit the 200 yd 10 for 10 (which at my level of shooting, is a great feeling). It was a windy day, and I’m still learning to overcome wind, especially with lighter bullets, so I hit the 300 yd target just 4 for 10. But I’ll keep at it.
The long and short of it is that I’m really pleased with this rifle, and I really feel like Ruger is onto something with their American. I would buy a couple more in a heart-beat to have them on hand. I think the 6.5 Grendel in the same model will be the next bolt gun purchase.
