rossi 92

Raise that front sight. (!)
(causing you to lower the muzzle)


(Also consider, of course... what range will you really be using it at)?
 
Last edited:
You need an additional 150 thousandths (0.15") on that front sight. See HERE for options from Skinner.

Rossi_RG_Front.jpg


> Required front sight height is generally slightly taller than the
> factory front sight. We offer a replacement front sight sized
> to fit the oversize Rossi dovetail which is tall enough to be
> trimmed to the exact height needed for your rifle. Please
> read the information on our FAQ page for front sight information.
 
Hawg Haggen said:
Taller front or file the rear notch.
Click to expand...

I'm sure you know the right answer, but mis-worded your reply - with a conventional sight picture, placing the top of the front sight level with the top of the rear sight, filing the notch deeper won't accomplish a thing. The top of the sight itself has to be lowered. After draw filing the necessary amount off the top of the sight, the notch may also have to be cut deeper too, depending on how much the sight was lowered.
 
I'm sure you know the right answer, but mis-worded your reply - with a conventional sight picture, placing the top of the front sight level with the top of the rear sight, filing the notch deeper won't accomplish a thing. The top of the sight itself has to be lowered. After draw filing the necessary amount off the top of the sight, the notch may also have to be cut deeper too, depending on how much the sight was lowered.
Click to expand...

True. I didn't think it all the way through. Thanks for correcting me.
 
You must log in or register to reply here.
Back
Top