romanian wasr 10/63 sidefolder

C

charlescaylor

Inactive
i have a romanian 10/63 ak-47 with a factory tapco style sidefolder is the a way to remove it so i can put a fixed stock in its place
 
yes it's quite simple actually, there is a single screw located at the top of the stock where it meets the reciever, that is the only thing holding the stock to the reciever. I will caution you though that fixed buttstocks kick like a mule compared to side folders.
 
yea i noticed that but thanks for the info now all i need is to scrape up the money for a complete stock set or just buy a wood stock and sand it and my uper and lower handguard then revarnish it
 
all of the wasrs I've dealt with furniture swaps on just had the one screw, is it the metal wire stock or the plastic side folder? I haven't worked with wire stocks too indepth so if that's the case you may have another screw or pin somewhere, if it's the plastic stock then there should only be the one screw and it probably just needs a little elbow grease.
 
Remove the top cover, then push the recoil spring rod forward to unhook it and move it to the side. Then remove these two screws. It may be a tight fit, but with those two screws out, you can wiggle and pull the stock out.
screws.jpg
 
You must log in or register to reply here.
Back
Top