I would like to take mine apart and give her a good cleaning but don't have instructions. Thanks, Tony. tonyvalerio@hotmail.com
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Remington Nylon 66 Assembly instruction
- Thread starter TonyV
- Start date
Bill DeShivs
New member
Don't disassemble it. You may never get it back together.
Need that also.
My brother in law took a Nylon 66 apart and like so many can't figure out reassembly. Any help doing this available here? He has no manual for this gun. Tried the Remington website for a possible manual download. Only seems to have current model weapons though.
Thanks much for any help at all guys,
Kevin G. KGUERTIN@COMPASCABLE.NET
My brother in law took a Nylon 66 apart and like so many can't figure out reassembly. Any help doing this available here? He has no manual for this gun. Tried the Remington website for a possible manual download. Only seems to have current model weapons though.
Thanks much for any help at all guys,
Kevin G. KGUERTIN@COMPASCABLE.NET
Last edited:
All the Remington nylon information that you could ever need can be found here. http://www.nylonrifles.com/NylonRifles/Welcome.html
nylon 66
I had difficulty with part 13 as it has to go above the pin. It is a little difficult and is not illustrated in the parts diagram.
I wouldn't fully dissemble the 66 but remove the bolt and clean any carbon you can reach with a chopstick etc and clean the bolt assembly with a solvent spray gun cleaner available Walmart etc
I had difficulty with part 13 as it has to go above the pin. It is a little difficult and is not illustrated in the parts diagram.
I wouldn't fully dissemble the 66 but remove the bolt and clean any carbon you can reach with a chopstick etc and clean the bolt assembly with a solvent spray gun cleaner available Walmart etc