Remington 870 - need guidance

[RickC]

I just bought a Remington 870 12 and will soon pick a magazine extension kit for it.

How do you remove the internal spring retainer at the top of the magazine tube (under the thread-on cap). I thought it just turned out, but it doesn't appear to be threaded. There is a slot in it and I can see the end of (I assame) a plug to limit its capacity to 3 shots (a legal requirement where I am for hunting).

Thanks for the help.

 

[Gun Docc]

Rick,
you should see an indention on the magazine tube that holds the retainer inside the tube.
simply push the retainer down into the tube with a large screwdriver and align the slot in the retainer with the indention and then let the spring push it out coming by the indention it should come out easily.

------------------

Gun Docc
http://guncustomizing.bizhosting.com/1.htm

 

[B Shipley]

Note that those little indentations will need to be removed by your gunsmith to get the extension to function properly (i.e., no shells will go past them).