J jdscholer New member Feb 14, 2009 #1 I've got a totally stock, 700 Rem ADL, and wanted to know if any of ya could tell me the proper technique and sequence for tightening the barrel/action screws when mounting the action to the stock. Prethanx. jd
I've got a totally stock, 700 Rem ADL, and wanted to know if any of ya could tell me the proper technique and sequence for tightening the barrel/action screws when mounting the action to the stock. Prethanx. jd
D DnPRK New member Feb 15, 2009 #2 I tighten the screws in stages. They aren't big bolts, so the torques aren't gorilla tight. Install front and rear screws loosely. Slide the barreled action rearwards to seat the recoil lug against the shoulder in the stock. Tighten the front screw to 25 inch-pounds (NOT foot-pounds) initial stage. Tighten the rear screw to 25 inch-pounds, initial stage. Tighten the front screw to 35 inch pounds, final stage. Tighten the rear screw to 30 inch pounds, final stage. You're done.
I tighten the screws in stages. They aren't big bolts, so the torques aren't gorilla tight. Install front and rear screws loosely. Slide the barreled action rearwards to seat the recoil lug against the shoulder in the stock. Tighten the front screw to 25 inch-pounds (NOT foot-pounds) initial stage. Tighten the rear screw to 25 inch-pounds, initial stage. Tighten the front screw to 35 inch pounds, final stage. Tighten the rear screw to 30 inch pounds, final stage. You're done.
