Jeff Thomas
New member
I've done a search on this in TFL, and I have found various discussion, all apparently positive, but not exactly answering my question. I have a brochure I picked up at a gun show from Buffer Technologies, indicating they have these buffers for AK/Valmet/Galil's, M1A/M14's, Ruger 10/22's, FN/FAL-L1A1's, SKS's, Ruger Mini 14/30's and 1911's.
Cost seems fairly reasonable if they truly protect fine firearms. However, my questions are:
1. If these buffers are such a great idea, why don't the manufacturers install them in the first place?
2. Considering their engineering purpose, I assume they wear out from time to time, and must be replaced on a regular basis? If so, does that answer my question #1 to some extent, and how often do they need to be replaced?
3. Is it practical to install most of these yourself, or is a gunsmith a better way to go? (I realize this may vary depending upon the firearm involved.)
4. Are there any other brands I should consider besides Buffer Technologies?
Thanks for any help you can provide. Have a good week. Regards from AZ.
Cost seems fairly reasonable if they truly protect fine firearms. However, my questions are:
1. If these buffers are such a great idea, why don't the manufacturers install them in the first place?
2. Considering their engineering purpose, I assume they wear out from time to time, and must be replaced on a regular basis? If so, does that answer my question #1 to some extent, and how often do they need to be replaced?
3. Is it practical to install most of these yourself, or is a gunsmith a better way to go? (I realize this may vary depending upon the firearm involved.)
4. Are there any other brands I should consider besides Buffer Technologies?
Thanks for any help you can provide. Have a good week. Regards from AZ.