Question: Rolling block Receiver crack???

O

OneBarfly

Inactive
Hello,

I recently picked up an antique Remington rolling block rifle. There appears to be a flaw in the casting or forging on the receiver. Perhaps the case-hardening cracked when heating or cooling one hundred and forty years ago?

I guess that I'm just looking for opinions as it concerns whether or not this is something to worry about. It almost looks like the hole was drilled after the mark appears? notice how the case-hardening colours flow around the flaw? I know these are just pictures, but what's your gut feeling?

Cheers & Best regards,

Richard

dsc01688.jpg

dsc01689.jpg
 
It looks like that is a crack and goes all the way through. Also, FWIW, the coloring in the area is different from the rest of the receiver, leading me to think that the crack is an old one that someone tried to weld up and it re-cracked. You don't know what was done, how badly the receiver was weakened, or what may happen if the gun is fired. My strong recommendation is that the gun be retired to collector status.

That is my "gut feeling."

Jim
 
I would agree, It will make a nice wall hanger. Some of these OLD guns in perfect shape let loose on occasion, I would be afraid to shoot one with an obvious defect like that.
 
FYI- I cannot detect the crack either in the pin hole or on the other side of the forging. It has not been re-welded, which leaves me to believe that it was present right after case hardening and therefore was subequently passed QC by Remington. The pin hole appears to have been drilled right thru the crack. My thinking is that it's crack in the case hardening. I will take it to a Smith for a first hand review. Kind of hard to tell by only the pictures. I do appreciate your help!
 
It is hard to really tell much without seeing the gun, but I can tell you this much - that crack was NOT there when Remington shipped the gun. Today, some factories have a "pass it on" attitude toward defects; that was definitely not true in those days, even on large military contracts. They made 'em right.

Jim
 
It also looks from the picture, the crack is also on the right of the hole too, It might just be the pic, but it looks like a very short crack.
 
crack

Dear Sir:
Send it down to Douglas bbls in Charleston WVa - they can magnaflux it.
Harry B. ---- It looks like a crack!
 
You must log in or register to reply here.
Back
Top