H Homerboy Moderator May 8, 2015 #1 I can't find a brush that says 8MM. Is another American size brush the same?
J Jimro New member May 8, 2015 #2 Look for 32 caliber. A 33 should work as well if you can't find a 32. Jimro
S Smoke & Recoil New member May 8, 2015 #3 Here ya go...........http://www.amazon.com/Outers-30-Caliber-Bronze-Threads/dp/B0011ZOX06
S Smoke & Recoil New member May 8, 2015 #4 Hey, also be sure of the bullet diameter for your Mauser when shooting, as in .318 dia or 323 dia.
E Erno86 New member May 9, 2015 #5 Brownells sells 8mm brushes. The brass core bronze brushes are the best...compared to the steel core bronze brush.
Brownells sells 8mm brushes. The brass core bronze brushes are the best...compared to the steel core bronze brush.
T tahoe2 New member May 17, 2015 #6 8mm brush ? I use 338 or 35 brushes (or 32 Spl if found) when I use one, which is not often. I clean after every outing and usually only need a wet patch or two and dry after that, BTW I only shoot my hand-loads, no mil-surp or corrosive ever goes through mine.
8mm brush ? I use 338 or 35 brushes (or 32 Spl if found) when I use one, which is not often. I clean after every outing and usually only need a wet patch or two and dry after that, BTW I only shoot my hand-loads, no mil-surp or corrosive ever goes through mine.
F F. Guffey New member May 17, 2015 #7 I make a bore snake type cleaner (for my use) that is impossible to stick and or lock up. I have no trouble finding brushes that fit at gun shows/ F. Guffey
I make a bore snake type cleaner (for my use) that is impossible to stick and or lock up. I have no trouble finding brushes that fit at gun shows/ F. Guffey
M Mk VII New member May 19, 2015 #8 Pro-Shot make one sold for 8mm. Though their .338 brush is just a little bigger.
E Erno86 New member May 19, 2015 #9 Once the 8mm brush wears out...you can still use it for 30-06 bores.