I've been lurking on this site for a while since I'm new to the AR world. Hopefully you guys can help me resolve my problem. I have a LMT .556/.223 Ar with a Young National Match Bolt Carrrier Group.
The problem I'm having is when I shoot, the gun discharges the spent cartridge and injects a fresh cartridge in the chamber with no problem. When I go to fire another shoot nothing happens. The trigger is not set and I'll eject the chambered cartridge and you can see where to firing pin has made contact but not enough to fire the bullet. I've even had instances where the gun would fire 2 rapid shots with one pull of the trigger. Also, after shooting these rapid 2 rounds and the gun chambers the next round it also shows where the firing pin has made contact.After this happens you can't flip the safety lever to safe. It's locked in the fire position. I went to the range the other day and ended up throwing away a dozen or more bullets before giving up until I can fix the problem. I would very much appreciate any advise or suggestions to help remedy my problem. Thanks.
The problem I'm having is when I shoot, the gun discharges the spent cartridge and injects a fresh cartridge in the chamber with no problem. When I go to fire another shoot nothing happens. The trigger is not set and I'll eject the chambered cartridge and you can see where to firing pin has made contact but not enough to fire the bullet. I've even had instances where the gun would fire 2 rapid shots with one pull of the trigger. Also, after shooting these rapid 2 rounds and the gun chambers the next round it also shows where the firing pin has made contact.After this happens you can't flip the safety lever to safe. It's locked in the fire position. I went to the range the other day and ended up throwing away a dozen or more bullets before giving up until I can fix the problem. I would very much appreciate any advise or suggestions to help remedy my problem. Thanks.