Ponsness Warren 375 setup

D

draggon

New member
Just mounting a couple of 375's I bought used and then refurbished.

The manual says to mount the press 6 inches from the edge of the bench.

I've done that for one already and it doesn't feel ergonomically right.

Before I start drilling more holes in the bench anyone have suggestions for "proper" placement.

Thanks
 
I have one of their press that I used for rifles and it's same press they use for shotgun. The press I have base stops under the handle so it has stop for the handle. I guess the 6" back is stop for the handle. You might call them see if there was a stop for that handle
 
You might be right. At 6 inches from edge of bench the handle stops with the links all vertical.

No part in the exploded drawings specifically as a handle stop.

Will move it forward for better ergonomics. If camming over centre is a problem I can always place an adjustable stop in one of the spare turret positions.
 
The press I have is for rifle/pistol and it's different handle then what's on for shotgun press . You have 375 but them make 200 for rifle which has different handle.

https://www.reloaders.com/collections/all/metal-matic-p-200

The handle you have is straight so handle stops based on being 6" back. I had a Mec when I loaded shotgun so have no idea on the shotgun press 375. If your loading shot gun may not be problem. If your using rifle/pistol may want to do something different like you posted.
 
You must log in or register to reply here.
Back
Top