Polishing a Barrel?

IronRuger

New member
Just wondering the best and easiest way to accomplish this. I have a bersa thunder 45 uc pro with a black matte barrel that is getting scratched up from use. I am not worried about the scratches but I was thinking about just polishing it. Is this advisable to do or a no no. I have never done any polishing before and have heard vinegar works?

Thanks
 
blue and rust remover, good buffing wheel and your choice of polishing compound. I usually use a buffing attachment on a dremel when I polish small parts
 
Well I dropped it in some vinegar since it is non abrasive. But I tried to plug the end of the barrel and didn't see a pin size hole in the end of the plug. I got vinegar down the inside of the barrel. Am I to assume this barrel is shot now.....:eek:
 
The barrel is fine.
Think about this next time: If the blued barrel has wear marks, wouldn't the polished barrel get the same wear marks?
 
Well yes. Very true. The outside of the barrel was marked up a lot from use so I guess the inside would aswell. Pheww thanks
 
Do this outside.

Toilet bowl cleaner removes the blue. Then hit with 600 emery paper. Back the paper with a solid object so you don't round off anything.
 
Back
Top