I've been looking at inertia operated autoloaders lately and I'd like a quick lesson on the difference between the various Benelli models (other than the obvious cosmetic stuff like stocks). I see they have the Vinci, the Montefeltro, the Legacy, M1, M2, SBE and SBE II, etc. Are they all the same mechanically and just sport different cosmetics or are there real differences internally?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Please edumacate me on Benelli autoloaders.
- Thread starter Doyle
- Start date
The SBE's (Super Black Eagle's) and IIRC the Legacy are mechanically different from the Montefeltro/Super90M1/etc in that their barrels are permanently installed into a receiver upper half, with the barrel and receiver upper separating from the receiver lower and buttstock when breaking the gun down.
The Montefeltro/etc barrels latch into a one-piece receiver, ala Remington 870 or 1100.
The SBE-type is the original Benelli design, and is the more expensive of the two designs to manufacture.
.
The Montefeltro/etc barrels latch into a one-piece receiver, ala Remington 870 or 1100.
The SBE-type is the original Benelli design, and is the more expensive of the two designs to manufacture.
.
JackSparrow
Inactive
I am a far bigger fan of the SX3 than any Benelli. They're just such smooth and beautiful firearms.
50 shooter
New member
LordofWar,
What type of loads are you using?
My Super90 M3 will cycle everything but those crappy all plastic Activ shells. Personally I feel better using the pump mode with birdshot so that I know there won't be any problems. For the most part if the dram eq. is high enough it should cycle the action in auto w/o any problems.
What type of loads are you using?
My Super90 M3 will cycle everything but those crappy all plastic Activ shells. Personally I feel better using the pump mode with birdshot so that I know there won't be any problems. For the most part if the dram eq. is high enough it should cycle the action in auto w/o any problems.
Some inertia guns have trouble cycling shells that are slower than about 1250 fps ....especially the knock off models from Stoeger, etc ....
I have a Benelli Super Sport in 12ga and 20ga - and they will cycle any shell, even 7/8 oz or 3/4oz of shot as long as its at 1200 fps. They will not cycle any shell at 1150 fps .......but I keep them clean and well lubed / which I think is the secret.
My opinion, is some of the "knock off" models of inertia guns, like Stoeger, use similar actions to the Benelli - but the parts don't seem to be as well machined.
I have a Benelli Super Sport in 12ga and 20ga - and they will cycle any shell, even 7/8 oz or 3/4oz of shot as long as its at 1200 fps. They will not cycle any shell at 1150 fps .......but I keep them clean and well lubed / which I think is the secret.
My opinion, is some of the "knock off" models of inertia guns, like Stoeger, use similar actions to the Benelli - but the parts don't seem to be as well machined.