Pics of your 10/22
- Thread starter steeps09
- Start date
rantingredneck
New member
For some reason I have this "thing" where I like sets of guns that sort of match.
Stainless .22's (I use these primarily in Ruger Rimfire matches Open Division)
Stainless 10/22 All-weather and original 22/45's (pre-mkIII) stainless. Primary Arms optics. Upgraded extractors (all around) and mag release on 10/22. Extended charging handle on the 10/22. Tech Sights co-witnessed through the PA optic.
Plain Jane .22's (I use these primarily in Ruger Rimfire matches Limited Division)
(only modifications are to extractor and mag release along with fiber optic sights on both guns)
These are for when I'm in a Mall-Ninja mood
:
10/22 in standard birch stock sanded and refinished with Ebony Minwax stain. UTG quadrail, HK SL8 sights, Primary Arms Aimpoint clone (irons cowitnessed through). Upgraded extractors and mag releases on both guns.
Stainless .22's (I use these primarily in Ruger Rimfire matches Open Division)
Stainless 10/22 All-weather and original 22/45's (pre-mkIII) stainless. Primary Arms optics. Upgraded extractors (all around) and mag release on 10/22. Extended charging handle on the 10/22. Tech Sights co-witnessed through the PA optic.
Plain Jane .22's (I use these primarily in Ruger Rimfire matches Limited Division)
(only modifications are to extractor and mag release along with fiber optic sights on both guns)
These are for when I'm in a Mall-Ninja mood
:
10/22 in standard birch stock sanded and refinished with Ebony Minwax stain. UTG quadrail, HK SL8 sights, Primary Arms Aimpoint clone (irons cowitnessed through). Upgraded extractors and mag releases on both guns.
Heres my 10/22-
KIDD classic receiver
KIDD 20" fluted polished match barrel
KIDD single stage trigger 1.5lbs with speed mag release
KIDD scalloped silver bolt with KIDD firing pin and KIDD extractor
KIDD silver charging assembly
KIDD receiver pin kit
KIDD buffer
Revolution Eliminator stock granite grey
Mueller Eraticator 8.5-25X50mm silver
Burris nickel Signature Zee rings with posi align inserts
Sorry for the bad pics...haven't been able to get good ones yet...
KIDD classic receiver
KIDD 20" fluted polished match barrel
KIDD single stage trigger 1.5lbs with speed mag release
KIDD scalloped silver bolt with KIDD firing pin and KIDD extractor
KIDD silver charging assembly
KIDD receiver pin kit
KIDD buffer
Revolution Eliminator stock granite grey
Mueller Eraticator 8.5-25X50mm silver
Burris nickel Signature Zee rings with posi align inserts
Sorry for the bad pics...haven't been able to get good ones yet...
Delaware_Dan
New member
ozarkrecluse
New member
Here's one of mine...
1967 Ruger 10/22
Here is My recently aquired ( from B-I-L ) 1967 Ruger 10/22 wearing the original overton walnut stock. When I bought it from B-I-L it look as if it used by the Swamp people. About 40 coats ( or more stopped counting LOL ) of Howards Feed & Wax really brought the stock out.
Here is My recently aquired ( from B-I-L ) 1967 Ruger 10/22 wearing the original overton walnut stock. When I bought it from B-I-L it look as if it used by the Swamp people. About 40 coats ( or more stopped counting LOL ) of Howards Feed & Wax really brought the stock out.
Niner4Tango
New member
Only one real answer to the above for me.... ALL.
10/22s are kind of like Lays Potato chips...you can't just have one.
as for e-mishka's question above about the stock in the picture before... that looks like and ATI stock to me....
back to scope, red dot or Iron .... they all have their place and with a 10/22 you can learn to develop better skills with any of them.
10/22s are kind of like Lays Potato chips...you can't just have one.
as for e-mishka's question above about the stock in the picture before... that looks like and ATI stock to me....
back to scope, red dot or Iron .... they all have their place and with a 10/22 you can learn to develop better skills with any of them.
ch47gunner
New member
I've posted these before but, I haven't had a chance to take any newer pics.
Bruce
Custom 10/22 -
Volquartsen UltraLite receiver
Green Mtn. 20" match barrel
Volquartsen Target stock
Volquartsen machined bolt
Volquartsen TG2000 trigger group
Volquartsen compensator
Mueller 8.5-25x44AO Tactical scope
Warne Maxima QD rings
Bruce
Custom 10/22 -
Volquartsen UltraLite receiver
Green Mtn. 20" match barrel
Volquartsen Target stock
Volquartsen machined bolt
Volquartsen TG2000 trigger group
Volquartsen compensator
Mueller 8.5-25x44AO Tactical scope
Warne Maxima QD rings
madcratebuilder
New member
10/22's are like potato chips, you can't have just one.
The old bench rifle.
International model with modified Bentz chamber.
Had to have one tacticool.
The old bench rifle.
International model with modified Bentz chamber.
Had to have one tacticool.
Joe the Redneck
New member
I got the stainless steel hex head screw for mine off of ebay for $5. My old one was buggered up.
