Pen Gun Please don't ban me!

Status
Not open for further replies.
T

Tony_uk

Inactive
Hi, I realise this is an odd first topic and i appologise if i am being rude, it is honestly unintentional. I am a university student from Edinburgh in sunny scotland and iu study engineering and for some weird reason our project for this term is the design of a pen gun.... i think the lecturer is trying to get us all arrested! Obivously in the UK guns are illegal and so information is thin on the ground, i have been reading through your forums and tbh i am in awe of such knowledge and i have searched through and gained a little knowledge but i was hoping i might be very cheeky and ask for some advice, i understand what i ask might be impossible to answer and i honestly do fear my door being kicked in by armed police but i want to pass this course! Now the mechanisms of firing i'm happy with you certainly have some good resouces on that but i was curious if you might be able to help with two issues....
firstly a lot of pen guns have no barrel, which means they must be dreadfully unaccurate at anything other than very close quarters.. is that the only application of such a device? as i certainly have the james bond assassination use in my head but it doesn't fit? and secondly the ones that do have a small barrel don't seem to be rifled? is this a case that there isn't enough barrel to make a difference or is it just the complexity of rifling means its not worth attempting for such devices? If anything i have said is inappropriate then please delete and let me know and i honestly appologise i am not here to offend merely to possibly ask a favour of your good nature, if you want to email me instead thats kewl but would really would appreciate any advice on the subject, even from people who have used such a device as here we don't even get guns as such so my experience is weak. Kind Regards
Tony
 
I once ran into a guy who'd built his own pen gun - it looked like those old tear-gas pens that had a tear gas cartridge that screwed into the end, but this gizmo had a metal barrel that loaded from the front - making it a muzzle loader.

How are UK laws on muzzle loading firearms?

Regardless, considering how the spring and such were put together, I would NOT feel safe carrying this around in my shirt pocket!
 
Twenty five years ago, my Mother's husband and I took one away from his sister. It was a black, knurled tube with a spring actuated by pushing the little handle out of a notch at the end of a slot. I want to say it the tube was aluminum, but I really can't remember. I also don't recall the details about how one loaded it, but this one had a .410 shotgun shell in the pipe.:eek: I remember it being well made and looking like it came off of a pretty substantial production run. It was cocked and floating around in her purse along with keys, compact, eye liner pencil, lipstick, etc.:eek:

If you must make one, please don't chamber it for .410! And don't carry it cocked, in your purse.:D
 
Since there's really no method of AIMING one of these, a rifled barrel is pretty useless on most of these, but most of the better-made ones will still have a rifled barrel. And, yes, they are meant for boint-blank range, where you can simply point at a target an arm's-length away and hope you stop him with your one shot.
 
Since there's really no method of AIMING one of these, a rifled barrel is pretty useless on most of these,
Click to expand...
A handgun in the US must be rifled otherwise it is considered an AOW and subject to NFA rules.
 
Tony- a word of fatherly advice, if you wish to enjoy life by all means design a pen gun but under no circumstances build one.

If your tutor says it is part of the Course, group together and request legal advice.

I once represented a Commando who was taught how to make 'improvised weapons' at work- he took one home and showed his mates and was busted by the Police. We could not escape a conviction on the basis that it had been made as part of a DOD training program.

Pen guns can also be dangerous- at both ends of the barrel.
 
Last time I visited a client in gaol they were taking a special interest in mobile telephones.

Apparently there is an eastern european pen gun that looks like a mobile phone and that has five barrels mounted in it.
 
the military used pencil flare launchers many many years ago. they usually were for pilots in the survival kits. but that was ok until someone decided to take one of the launchers and the empties to load stuff into them. or adapt them to shoot .38 spl. shells etc. somewhere out there after the atf or uncle sam found out they made the manufacturers of them put serial numbers on them. to make them easier to trace and or register. penguin was a big maker of the flares and possibly the launchers too. i carried a penguin launcher with about 8 red and 2 white flares for it. when i bow hunt for emergency signalling.

flaming arrows don't go high enough or burn that long using lit toilet paper on them. and not only that i only carry 8 of them.:rolleyes:

but no matter what do NOT make a pen gun. design one carefully if you must for the course. but do not make it.
 
thanks

Hi, thanks it is no way going to to be built, it is part of a design course to be a basis for the thermodynamics of the reaction and the choice of metals to be looked into, it is all theory. The problem i have is our lecturer has decided that a pen gun is an assassination weapon but the historic versions seem to be a case of last ditch survival or even suicide weapons. He has an idea that you would use it to assassinate someone from like 20 yards? I am struggling to see that it would be fit for such a purpose. Any views?
 
Tony, a pen gun is a hard to aim one shot firearm. It would leave the assailant little or no chance of evasion.

They also tend to chamber low powered rounds such as .22's.

They are desperation weapons-the type of cheap and nasty thing put together by a person who wants to steal money on the street to buy drugs.

Probably the high point of the disposable gun concept was the Liberator produced during WW2- although this had rudimenary sights and was shaped like a traditional firearm it was non rifled. It chambered the .45 Colt round and the general idea was you shot a lone german with it and stole his gun.
 
A handgun in the US must be rifled otherwise it is considered an AOW and subject to NFA rules.
Click to expand...

In the US, a pen gun is considered an AOW whether it's rifled or not, as is anything else that is a gun but doesn't LOOK like a gun (knife guns, flashlight guns, cane guns, belt-buckle guns, phone guns, etc., etc., etc.)
 
If its for the purpose of design only, I have some ideas. First of all, the barrel should be made of stainless steel as should the "locking device". You want to ensure that the gun does not blow up in your hand. The outer skin of the pen could be made of titanium due to its strength and light weight. The area between the barrel and outerskin could be filled with ceramic fiber to avoid heat transfer. Heat should not be a major concern anyways since these are often one shot deals. The maximum caliber I would go is probably .32 acp since you have to be able to hold onto the gun as well. Besides, you have to be concerned about the overall diameter of the pen. The "trigger" should probably be located on the cap and should be activated with the thumb (so it can handle the recoil). The pen would have to be held like a knife in the downward stabbing position. The pen clip can be used to cock the firing pin.

I hope this helps. I don't suggest building it, especially in your part of the world. Even in the somewhat "gun-friendly" US, it is still illegal without a gun manufacturer's license. Good luck on your project and let us know how you did.

p.s. Feel free to post your plans when you finish. ;)
 
Those guns are simplicity itself to make. A locking device is not needed, just an inner collar to take the recoil.

Jim
 
An old Sedgley circular
(For sale on this forums ads)

pix1037680859.jpg
 
"They are desperation weapons-the type of cheap and nasty thing put together by a person who wants to steal money on the street to buy drugs."

That does not seem to be the case. While "zip guns" have been made out of such materials as automobile radio antennas, pen guns - while easy enough to make - are (IME) very uncommon "on the street." For that matter, the old fashioned "zip gun" is unheard of today. Flush with drug money, the bad guys have graduated to Glocks or at least Lorcins and the days of cheap old suicide specials and home-made pistols are long gone.

The single shot pen gun may have some role in spy dramas, but, again IME, is not a viable weapon today, though the tear gas version is still carried by some people for protection.

FWIW, the "Liberator" pistol was vastly over rated. I was unable to find any instance where one was actually used against the enemy in WWII, though some were used by semi-official police in the Philippines and China after the war until better weapons could be obtained. Contrary to the original idea, none were ever dropped in France, or any other occupied country in Europe. All but a few were destroyed after the war by dumping in the ocean, which is why those remaining are collectors' items.

Jim
 
In response to Jim Keegan's comments about Liberator pistols- the only one I know of actually came home with a Vietnam Veteran in the 60's- I have no idea how it got to SVN.
 
In the US, a pen gun is considered an AOW whether it's rifled or not, as is anything else that is a gun but doesn't LOOK like a gun
Click to expand...
Sorry, I was referring to the pen guns that have to be folded in order to be fired. The ATF declared them to be a regular handgun and not an AOW as they do "look" like a gun when they are folded. My fault that I wasn't more specific.
 
Correction: The Liberator pistol was chambered for the .45 ACP cartridge, not the .45 Colt. ;) Jim Keenan's info is correct AFAIK except he left out that the Liberator holds two dubious honors - the ugliest pistol ever made and the only pistol that takes longer to reload than it did to build.
liberatorPak.jpg

Liberator .45 ACP smoothbore Pistol. Manufactured by
General Motors Guide Lamp Division circa 1943.

Re: Pen Guns
A friend's father had a collection of pen guns from WW-II Europe. Most of these were in either .32 or .380, with a screw-on chamber/barrel, solid striker propelled by a spring and a short barrel. Quite a few were painted to look like wood sticks with the theory that after shooting a Nazi occupier the pen gun could be tossed into nearby brush and look like a stick, not something manufactured. These were made by the underground in Belgium, France, and Holland. Most were not rifled because they were intended for use "up close & personal".

I doubt that any pen gun, even with a rifled barrel, would have an effective aimed range of more than about 2-3 meters. There is no way to easily/comfortably hold one; between the grip required and the clumsy trigger mechanism, holding it steady to hit a target at even room distance is almost impossible.
 
I don't doubt that most of the people here could put together a working concealable firearm in less than an hour after a trip to the hardware store; here's a scan from a book called "Zips, Pipes, and Pens", by J. David Truby, showing a commercially-made Sardaukar pen gun. Like most examples of the type, it uses a striker that has to be pulled back and released with the thumb to fire the chambered round, but these types are normally immediately recognizable as firearms. I've seen several designs where the pocket clip itself acts as the trigger, and it releases the striker either by twisting it to the side or lifting or pushing it to release the striker.

Pengun.jpg
 
Status
Not open for further replies.
Back
Top