Para Ordnance Expert .45

D

Deaf Smith

New member
Say, found a unused Para Expert .45 for sale at a pawn shop.

Strange thing is the rear sight is moved way to one side but I see no marks from a drift punch.

$399!

Now has anyone heard of Para Ordnance 1911s having issues with shooting to one side?

Thanks,

Deaf
 
If it was used (not unused) then it might be the shooter was pulling his shots. You say new in a pawn shop.

Then I read a very bad review since the Remington take over. Another good name down the toilet.
 
Well it has ZERO wear on it. Looks like it wasn't shot. It also has the Colt designed firing pin lock.

I didn't disassemble it but I could see no were on the outside.

But I figured $399... not bad IF it does not shoot to one side.

Deaf
 
Somebody at the gun store may have fiddled with the
rear sight. Bring it back on center and shoot it.

IME, Para's shoot straight.
 
Strange thing was, the sight had no marks like someone had drifted it over, way over!

Maybe in the factory someone didn't put it in right.

Say, is $399 a good price?

Deaf
 
The company's been sold, so you may have a little trouble finding
OE parts. Fortunately, you should be able to shoehorn most aftermarket
1911 stuff onto it.
 
The company's been sold, so you may have a little trouble finding
OE parts. Fortunately, you should be able to shoehorn most aftermarket
1911 stuff onto it.
Click to expand...

It is now part of the Remingon family. I would look at location of manufacture. That is a legal required marking. I would not waste money on a Freedom Group/Remington gun. The first ones off a new assembly line are going to be guarantee trouble. Read the reviews, metal fragments, non-functional trigger and the safety broke first time engaged.
 
Check to see if the front sight is off-center; a small error at the front will require a large adjustment at the rear.
I had a gun with the front just barely off-center, and had to move the rear 1/8" to zero it.
 
Yeah, IME, Para has the world's worst ambi safety.
I had mine replaced. It has a weak spring to compensate
for usage on both sides, and is still prone to
breaking, anyway.
 
My Buddy had one, it was a jam o matic, magazines were rubbish.

He sold it for a Glock 19 he now carries. I was employed by the Crown Att. in Brampton Ontario Canada a while back(same as DA). Netted $1200 Canadian ($13.00 US!) My expertise was required to show how the shots were fired.
The killer was found not mentally able to go to trial.

Ended up in Penetanguishene super jail/asylum for the criminally insane . But the instant he is declared OK? He walks. After killing man and Wife, with more than one Para Ordnance .45. He worked at the factory, that was a 1/4 of a mile from my house in Ontario.
He stole parts, and built the guns at home. The only ammo he had, was proof loads he also stole from work as well. The Police work up on the scene was miles off. The perp was a recent immigrant to Canada, an ex Secret Police Officer from East Germany. Talk about extreme vetting!
 
Not true, a 1/8" change on the front will require a 1/8" adjustment in the same direction at the rear.
Click to expand...

I wasn't talking about how much the sights must be moved to change POI, but the alignment of the sights relative to each other.
 
To be fair, my Para has become an ongoing project.
Jammed every 3rd round or so, at first. Wolff mag springs
helped that, but it still hangs up, once in a while.
 
Why should there be marks? Maybe they were moved with a sight pusher instead of a drift.
Click to expand...

Cause usually people who do their own adjustments use drift punches. Not that many pusher devices outside gunsmiths. Add to that the fact the gun has not been fired much I think the factory didn't put the sight in right. Poor QC.

Deaf
 
plastic or brass punch shouldn't leave marks, maybe someone kept the rear sight and replaced it with another and just slid it on as far as they could without using a punch..Which side is it sticking out on, right?
 
Could be poor QC.

As a side note, there are a LOT of pusher devices out there easily purchased for not much money. Go on ebay and search for sight pusher; you'll see there's a lot of small shops putting these out, most of them based on a the same basic design. I purchased one last year and have been pleased with how it works; much easier than beating on something with a brass punch and it leaves no brass marks behind.
 
You must log in or register to reply here.
Back
Top