Oops

9

9mmSkeeter

New member
So the other night I was done with the powder in my hopper. I had win231 in there and went to dump the rest of the powder back into the jar. Well, I saw "winchester" but foolishly wasn't paying attention so I ended up mixing about 1/2 cup of 231 into my Auto Comp. They use similar charge weights. It's imossible to tell the difference between the grains in the jar so I can't seperate it. As it stands the ratio is about 1/2 cup of 231 mixed in about 14 oz of Auto Comp. I shook it up real good thinking I'd disperse the grains sparsely. Should I just chuck the 1 lb jar in the garbage?
 
Last edited:
Evidently you don't abide by the golden rule of "The only powder bottle on the bench, is the one that is being used" :) . Chuck it. You might know how they act separately, but not together. Chuck it (use as fertilizer).
 
Use it on the lawn.

They use similar charge weights.
Click to expand...

The Hodgdon reloading data site lists very different starting and max loads for the two powders. For example, for .45 ACP, the Win 231 max loads are below the Auto Comp start loads.

Bad juju
 
I'll chuck it and use the money I'd save from not having a doctor visit to buy a couple pounds of clay dot (I like it better anyways).

I love cheap lessons.
 
I'll chuck it and use the money I'd save from not having a doctor visit to buy a couple pounds of clay dot (I like it better anyways).

I love cheap lessons.
Click to expand...

Good call. Nobody likes dumping powder but powder can be replaced easily enough. Not so for fingers.
 
Last edited:
Hmmm. Isn't this about the third "I mixed my powders, what do I do?" thread this week? :cool: Others are being nice so I'll be the jerk; Open yer eyes! There is no excuse for mixing powders! If you can't pay enough attention to your reloading to keep your powders separate, then just buy factory ammo. There are hundreds (if not thousands) of posts/threads about how to avoid mixing powders so did you not pay attention or did you not think that info pertained to you? :confused: The most basic and simplest method (and it has been repeated many, many times) is to have only one container of powder out of storage and on the bench!

OK done with that. I don't think that I have enough experience/knowledge in 30 years of reloading to fool with mixed powders or duplex loads, so I'd chalk it up as experience and toss your "blend"...
 
The most basic and simplest method (and it has been repeated many, many times) is to have only one container of powder out of storage and on the bench!
Click to expand...

One more fail safe - label your powder dropper with the powder in use (a post-it note and rubber band works fine for this).
 
I would

I would use it.

I believe 231 is faster than Auto Comp. Knowing that, I would take my Auto Comp load recipes, back them down by 10%, and work up from there. I bet in the end, I could probably end up with virtually the same loads as I started. But, I would play it safe (at least in my book) and keep (edit): the mixed powder for middle-of-the-road range shooters - nothing real potent. Something that shoots nice and runs clean in the gun.

That's just would I would do; and is not a recommendation for anybody else. All I am saying is that doing so would be within my comfort level. Other's may feel otherwise, and any other viewpoint is certainly worthy of respect.
 
Last edited:
Hmmm. Isn't this about the third "I mixed my powders, what do I do?"
Click to expand...

Yeah. I'm thinking Mercury in Retrograde...maybe Biorhythms out of sync or possibly...A DISTURBANCE IN THE FORCE!!!

I might go get a good luck horseshoe to hang over my reloading bench. I don't believe in such nonsense but folks that know about such things tell me it'll work whether I believe in it or not. :D
 
I wouldn't go back to factory ammo if you paid me to. There are mistakes in reloading, that's why we live and learn (and sometimes have surgery). :D :p
 
231 and Autocomp are nearly the same burn rates, and very very similar charge weights, overlapping charge weights...

So with 9 MM 115 grain RN ammo, using the same OAL, the starting charge is:

4.4 and 4.3 respectively.

how do you know its unsafe? Because its not in a manual? Why is it unsafe? What leads you to believe its unsafe. Where did you read its not safe? Who said its not safe, and where is the documentation and test to prove it?

This is not like mixing pistol powders with rifle powders and shooting that in a rifle...this is 2 ALMOST THE SAME burn rate, similar, overlapping charge powders.

Does mixing autocomp and 231 make nitro? Dynamite? C4?

Reality check: Just because its not in a manual/guide doesn't make it a BOMB nec...

These people who think their city blows up if they mix anything are just fear mongering. My question to you is simple.

Ok, you got VV 3N37 and VV 3n38

your loading 3n37. So my question is...if you mix in 3n38, how many granules does it take until you blow up your hand?

its mass hysteria! cats living with dogs!

load the faster powder specs? it doesn't take a rocket scientist. Its very basic to understand. Its just going to be marginally weaker than the faster powder spec, depending on % of slower powder. Or not, and flush it down the toilet because you could kill yourself? But the reason you could kill yourself is just because Hanno said so, with no rational, no reasoning, no backup, no proof, no example, no math, no science, no study, no MSDS data, nothing...just a simple...

better than blowing off your hand!

LOL man, you are too much. But I am special, my hand grows back, I guess? lol come on..
 
But the reason you could kill yourself is just because Hanno said so, with no rational, no reasoning, no backup, no proof, no example, no math, no science, no study, no MSDS data, nothing...just a simple...
Click to expand...

9MMand223only, please point out where I said he could kill himself. Let me know when you find it.

Or, is unfounded trash talk your idea of a discussion?

Here is what I actually said above:
"Good call. Nobody likes dumping powder but powder can be replaced easily enough. Not so for fingers."

how do you know its unsafe? Because its not in a manual? Why is it unsafe? What leads you to believe its unsafe. Where did you read its not safe? Who said its not safe, and where is the documentation and test to prove it?
Click to expand...

How do I know it is unsafe? Well, for starters, I have read the warnings on the Hodgdon and Alliant sites. I would assume any competent reloader using any of their powders has done the same. I believe these companies know something about powder. I'll rely on their knowledge and experience.

I have also read Speer 14 and NRA Guide to Reloading among others. What one chooses to do with the info is a matter of individual choice. My choice is to error on the side of caution. Hence my recommendation to 9mmSkeeter.

Hodgdon
Never mix any two powders regardless of type, brand, or source. Never substitute any smokeless powder for Black Powder or any Black Powder substitute.
Click to expand...
Alliant
Never mix any two powders regardless of type, brand, or source.
Never substitute any smokeless powder for Black Powder or its substitute.
Click to expand...

Speer Reloading Manual 14, pg 71:
"Never mix propellants. To do so is the height of folly!..."

NRA Guide to Reloading, pg 6:
"Never mix powders or substitute one powder for another."

National Reloading Manufacturers Association Safety Rules
(excerpted in the NRA Guide to Reloading, pg 108):
"NEVER mix powders of different kinds."

I recommended 9mmSkeeter put it on the lawn. That is what I would do. Of course, 9mmSkeeter and anyone else is free to ignore that advice.
 
Last edited:
I have a one pound bottle that I labeled junk powder. I would dump it all into this junk powder bottle. One of these days that bottle will be full and I will use it to blow up a stump but not for reloading.
 
I have been playing with loading down .38spl for plinking. I am down to less than a grain of powder to a 158gr wadcutter. they are really fun to shoot. if I had mixed powder, I would use it for those. no way in hell your ever going to create dangerous pressure with .8gr of powder. I would not go near even the starting load for either powder, if you don't have any revolvers to play with reduced charges then chuck it. you could also probably make a fun reduced charge for a bolt-action too.
 
I like the idea of using it as fertilizer, have you seen the prices of fertilizer recently? One pound should make your garden grow, the quality of soil today is really poor.

Now if you are really a MAD scientist you could use it to make solid fuel model rocket engines. (Yes Virginia, it is rocket science) Remember there are laws regarding the making of explosive devices so make sure they do not explode but just burn.

Adding nitrates to the water treatment system is not a good idea (algae really loves those nitrates), so you would be better off dumping the powder onto your plants as fertilizer than adding additional cost to your city for waste water treatment.

Just some thoughts on the matter.

Good luck and stay safe.
Jim
 
You must log in or register to reply here.
Back
Top