Old vs New GP100

M

Model12Win

Moderator
How are the new Ruger GP100s compared to the old ones? This gun has been made since the mid '80s and I am wondering if the factory new ones have changed in any way, possibly for the worse or even for the better. Are the new guns still considered a rugged and durable revolver?

Just looking for some feedback before I buy a 4" stainless model. Seems used prices for these are actually higher than some of the big box prices for a brand new one, so I figured I'd see what opinions were before getting a new one.

Thanks all!
 
:)Difficult to give you a solid answer, however I will comment that I was able to find a new inbox three inch GP 100,stainless .357 about three months ago that was made in November 2013, that is PERFECT. I turn 80 this month, and have been searching for the right carry gun for a long time.This one is IT.! I did change out the original Hogue fingergroove grips to the compact Lett style insert grips ordered from Ruger. They conceal better and are more comfortable shooting 158 grain magnum loads.
 
Thanks, all. I have a 6" barrel one made in 2011 and it is a sweet shooter for sure, but I know a lot can happen in 5 years and am wondering if quality has dropped as it has with many companies in the past half decade.

Truth be known, that 6" gun is a dream on the line but I'm looking for a holster gun and the 4" (well 4.2" really) one has been on my list for a while. Just wondering if they're still good to go.
 
I turn 80 this month, and have been searching for the right carry gun for a long time.

I'll be 74 on the same day you'll be 80 but my idea of the "perfect" carry gun is a little different than yours. For a long time now, I've been toting either a Colt Cobra or a Smith & Wesson Model 12; both great carry revolvers but not perfect. Perfect for me is the Ruger LCR, chambered in .327 Federal Magnum. I'm still looking for one in my area but, because I'm at the age where I don't buy green bananas anymore, I hope to locate one soon. :)
Click to expand...
 
Difficult to give you a solid answer, however I will comment that I was able to find a new inbox three inch GP 100,stainless .357 about three months ago that was made in November 2013, that is PERFECT. I turn 80 this month, and have been searching for the right carry gun for a long time.This one is IT.! I did change out the original Hogue fingergroove grips to the compact Lett style insert grips ordered from Ruger. They conceal better and are more comfortable shooting 158 grain magnum loads.
Click to expand...

Congrats JAREDSHS, on both the birthday and the choice. It's never wrong to choose a handy .357 revolver. ;)
 
I did not know the new ones had MIM.

When did this change occur? Is my 2011 vintage affected? I don't think I would want to own a revolver with MIM.
 
I noticed Ruger had adopted MIM to make some of their newer revolver parts a little while ago.

If they're doing it themselves, and bought high quality molds, it ought to be a good thing. They ought to be able to realize more consistency and tighter tolerances on their parts (like hammers) than investment cast/machined.
 
Model 12 & Cooldill,
Ruger started moving MIMs into the steel DA revolvers roughly 5 years ago.

The GP has a MIM trigger & cylinder bolt (cylinder latch in Ruger-ese), and thumbpiece.
Possibly a couple other small parts.

The decision was to NOT do a MIM GP hammer for cosmetic reasons.

Ruger specs out a more advanced MIM formulation for their vendors than the one S&W introduced years ago.
They do not do their own MIMs.

It holds up just fine in their guns.

You can check on your older one by looking at the back of the trigger.
Solid: Cast.
Hollow: MIM.
Denis
 
It is hollow. :eek:

It appears that even though it is MIM, it has held up. I've fired this gun many times and dry fired it thousands of times to the point of the trigger being super smooth. I have never broken a part.

Perhaps my misgivings of MIM aren't founded...
 
Unfounded here.
If you're dry-firing that much, the transfer bar's more likely to bust than the trigger.

Ruger's MIMs are not fragile.
They're not going to ship guns with parts that'll wear out in a hurry.

And you can pass that along to Cooldill. :D
Denis
 
When it comes to Ruger MIM isnt the problem, It's lack of quality control.
Yes Ruger does have an awesome customer service reputation. But I've grown tired of sending them in. And 3 of the last 5 I've sent in were destroyed and replaced with another model because they can only replace it with whats on the assembly line at that time. Not necessarily What you originally bought and paid for.
 
I sure am glad we have DPris around here and on THR to answer questions with his insider information.

I have no problems with MIM parts. Most would never know the difference without the internet. I wonder how many cast and MIM parts are on my truck engine that is just about to turn over 200,000 trouble free miles?:D
 
Can't tell you much about comparing old vs new but my 2016 model, 4" stainless steel is just outstanding. First buy you will want to make is a new hiviz front site. Makes a world of difference. The thing absorbs even the stoutest loads. Very satisfied owner.
 
Just switched out my carry rotation and am wearing my Match Champion. I think the half lug carries better than full, when 4-5" barrel. My 3" is cut back to the ejector shroud, so it is a moot point there. That gun is converted to 41 Special. All have Lett style grips from Altamont, with compacts on the 3" gun.

I didn't really pay for a Match Champion, since it was a trade-in for a scrapped Service Six. However, writing off the Six effectively made the MC a $1000 gun.

I have the second generation version with adjustable sights.
 
When I was getting a 3" GP, I was prepared to hate the trigger, since the net is filled with disparaging comments about them. I even read up on trigger jobs.
Surprisingly, the trigger turned out to be easily the equal of my well used S&W Model 15-3.
My GP is a seriously great shooting revolver.
 
When I was getting a 3" GP, I was prepared to hate the trigger, since the net is filled with disparaging comments about them. I even read up on trigger jobs.
Surprisingly, the trigger turned out to be easily the equal of my well used S&W Model 15-3.
Click to expand...

I've had the same experience with two recent production GP100s (one mine, one a friend's). The double action pulls are smooth and light out of the box, and no stacking anywhere in the pull. Not quite as good as a 1950s Smith, but as good or better as anything I've felt on a recent production S&W.
 
When it comes to Ruger MIM isnt the problem, It's lack of quality control.
Click to expand...
Yup. I've worked with guys that worked at Ruger and the management and supervisors for the manufacturing side of things just want numbers, quality be damned.

Not saying that Ruger only produces junk, because they don't, it's just that not every part of every gun gets made with the care and attention to detail you'd get from a high end place like Freedom Arms or S&W Performance Center.
 
You must log in or register to reply here.
Back
Top