Old .22 Revolving rifle, help I.D.?

I

ihctractor

New member
I have a very unique old revolving rifle that I need some info on. Its a small frame 9 shot revolving rifle chambered in .22 LR.

It loads single action style through a port in the back of the frame. Unloading involves pushing a release button under the barrel and pulling the cylinder pin out, once the cylinder is removed you push the pin back into the front which pushes a star ejector out the back ejecting all 9 shells at once.

The trigger will fire single and double action.
Barrel is 17 1/2" from crown to cylinder face and the overall length is about 32"
There is no name, proof marks or any other markings that I can find except for a 4 digit serial no# on the bottom tang.

The gun shoots very nice and is kind of fun but I really have no use for it and was thinking about selling.
Does anybody have any idea what this is, who made it, when, and about what its worth?
Thanks for any help you can give me.
 

Attachments

  • DSCF4146.JPG
    DSCF4146.JPG
    186.4 KB · Views: 483
  • DSCF4147.jpg
    DSCF4147.jpg
    179.1 KB · Views: 239
  • DSCF4149.JPG
    DSCF4149.JPG
    223 KB · Views: 215
Very unusual. Have never seen one like that before. Looks like an H&R pistol with a rifle barrel and butt stock attached. Just a long shot but did H&R ever make such? Total omission of name is odd and suggests it may be a knockoff or from another country?
 
Last edited:
It does look like an H&R. FWIW, I think it is an aftermarket job of converting an H&R revolver into a rifle. The guy who made it probably was unsure of its legality and removed all the markings. Technically, it would be illegal, if the gun started out as a handgun, to remove the serial number, but IIRC a lot of H&Rs never had serial numbers, so I wouldn't sweat that too much.

An interesting piece.

Jim
 
FWIW: The first thing I thought of when I looked at it was H&R. When I saw that it was a 9 shot my theory became stronger.
 
No loading gate. Its just an open port in the frame. When the cylinder locks in position the hole in the frame is always just a little off center from the hole in the cylinder so that the shell can't fall out. You pull the hammer to half cock position and the cylinder moves freely so you can line up the holes to load.
Lots of opinions that it's an H&R, anybody know a model and what it would be worth?
 
As far as I know H&R never made a revolving rifle, but it sure looks like one, Bill Foforth, the Iver Johnson expert is doing a book on H&R's and could answer if it was indeed a H&R I know he would love to see it for his research.
Who knows, you may have one of a kind like Bill's tool room Iver Johnson 38 specials,swing out cylinder revolver. http //www.geocities.com.iverjohnsoncollectors/[/url] well,that's his link, you will have to cut and paste or coyp.
 
Assuming the base gun was an H&R, I would say it looks like a Model 922, but one of the older ones after they went to the new cylinder stop but before they changed to the cross-pin cylinder pin release. Someone more expert than I will have to determine what era that was, but IMHO we are talking just before or just after WWII.

Jim
 
Everything about it screams H&R to me, too, but I can't find a thing on it.


When did you get it? That might at least help establish a date for it.
 
The frame and cylinder and all that looks exactly like my H&R model 900 revolver. I mean perfectly identical. So you either have a custom job or a prototype. You know where it came or presumably more than we know about that but I would say the experts listed above are the true source of knowledge on that thing. It might even end up pictured in a book! If it is a one-off, then establishing value would be difficult but from the immaculate appearance I would say that adds value. Looks like something you would have to advertise and whatever the highest bidder wants to pay is what it is worth. If there are no others like it there is no established value beyond what the original gun value was. Maybe an auction item but if you get it in a book with a picture, for some reason referencing it to the book will make it more desireable to collectors.
 
well, so much for a simple answer:confused:.
I picked this up probably 15 years ago in a consignment antique store. At the time I was sure I paid too much but for some reason I wanted it. I have no other history on it at all:(.
 
WOW...

I love that little plinker...when you decide on a price, zapp me a pm. Nice and unique fun gun.:)

I agree with those that say it screams H&R. but I've never seen one like that.
 
Last edited:
ihctactor, I haven't heard form Bill goforth yet but Jim Hauff has looked at the pictures and is very intrigued. He has asked if you will post a picture of the numbers on the tang. Jim is a H&R collector and is very knowledgeable on H&R's You will see his name in the 2009 Bluebook. He agrees, if home made it was by an expert, Jim has joined the forum but has not received his activation code yet. Jim thinks maybe a 922 from 1952 or1954
 
For some reason I can't post pictures ever since the site was down:mad:
The numbers are 4 digits that look hand done - not roll stamped. the number is either 0001 or 1000, can't tell.
 
ihctractor,
I know that Jim Hauff and Bill Goforth would really like to see some more pics of your revolving rifle, and quite frankly these guys are probably your best two chances in the world, at least in this country, to properly identify your piece. I also would like to see them, not because I am any kind of expert, but because I love any thing H&R!!
So if possible, e mail me any pics that you can, the more views, the better, and I will forward the pics on to these gentlemen. I don't know if Jim Is able to post on this site yet, so if not, I will relay any info he has to you.
I hate to give out his email without his permission, but I will be glad to forward the pics to him!
Jim Ritchie lorraine10@lmnetworks.net
 
I finally got in! Thanks to RJay for throwing the line. I think you guys have pretty well nailed down that this is indeed an H&R. Comparing the frame with pieces in my collection I, strongly, believe this piece is derived from the 1953 to 1955 2nd Model 922 because of the "acorn" shaped hammer spur. Tom2 said it looks just like the Mod. 900, that is because the M 900 was based upon the M 922, but had the left frame cut to allow the "Pop out" cylinder removal system rather than the "pull pin" system. I'd really like to eye ball this piece - however, from the pics, I'm inclined, also, to believe it is a pattern room or prototype piece. I've got a few prototypes (hand guns as well as shotguns) in my collection, and all have very unique serial or ID numbers, that's why I'd like to see the number stamped on the lower tang. On this Model during the specified time span, all the identifying stampings were on the left side of the barrel. So, if the original barrel was removed and the 16" was installed, all the identifiers would be lost. This revolving carbine may very well be one of a kind...I'd like to add it to my collection, should you ever decide to sell - let me know. Thanks for sharing this very interesting item.
Jim Hauff - H&R Collector
 
For Sale

Thanks everybody for the great information. After doing all all the research I can handle and not being able to determine a fair value on this, and being in need of some cash, I have decided to list it on Gunbroker and let the market determine the value. If you're interested you can check it out , item 123054092.
Thanks
 
I've been watching this thread diligently as the rifle very much intrigued me. Anyway just thought some of you would like to kmow that the rifle sold on gunbroker for 430 dollars, quite a bit cheaper than i thought it would go for.
 
You must log in or register to reply here.
Back
Top