Mach II Sailor
Moderator
kinda nice having Fathers Day and a Wedding anniversary one day apart and getting your gifts before the event.
this is one of them http://www.gggaz.com/index.php?id=149&parents=38,55
this is the other http://http://www.badgerordnance.com/productgroup.php?id=rings#
4-16X50 30mm Mil Dot http://www.legacysports.com/products/nikko/index.html
and these
and this too, http://www.swfa.com/c-231-super-sni...swfa.com/c-231-super-sniper-rifle-scopes.aspx
one of these
and finally this too
BUT !!
the best thing was the GG&G 30mm and the Nikko Stirling scope, i mounted it on my LWRC ODA 5.56mm sighted in, first group from a 20 rnd. mag. using my reloads, kept all in 3", then run a mag. full of LC-00kept all in 3.5" group.., then come the acid test ! i wrote down the settings, activated the accu-cam lever and off came the scope, put it on my big boomer, .499LWR, fired several rounds till dead center was hit a few times then dumped 20 more rounds down range, then removed the scope from the .499LWR, mounted it back on the LWRC ODA 5.56mm, reset the the dials to former markings and fired 10 rounds before looking, all rounds were in a 2" group and about 2" high !! hows that for near pin point accuracy/return to zero ??
thanks to all who had a hand in the production of what i call a damn fine rifle, scope and mount..., i'll also take credit for some very good reloads...
this is one of them http://www.gggaz.com/index.php?id=149&parents=38,55
this is the other http://http://www.badgerordnance.com/productgroup.php?id=rings#
4-16X50 30mm Mil Dot http://www.legacysports.com/products/nikko/index.html
and these
and this too, http://www.swfa.com/c-231-super-sni...swfa.com/c-231-super-sniper-rifle-scopes.aspx
one of these
and finally this too
BUT !!
the best thing was the GG&G 30mm and the Nikko Stirling scope, i mounted it on my LWRC ODA 5.56mm sighted in, first group from a 20 rnd. mag. using my reloads, kept all in 3", then run a mag. full of LC-00kept all in 3.5" group.., then come the acid test ! i wrote down the settings, activated the accu-cam lever and off came the scope, put it on my big boomer, .499LWR, fired several rounds till dead center was hit a few times then dumped 20 more rounds down range, then removed the scope from the .499LWR, mounted it back on the LWRC ODA 5.56mm, reset the the dials to former markings and fired 10 rounds before looking, all rounds were in a 2" group and about 2" high !! hows that for near pin point accuracy/return to zero ??
thanks to all who had a hand in the production of what i call a damn fine rifle, scope and mount..., i'll also take credit for some very good reloads...
Last edited: