Need help with free float quad rail.

F

FNSCARH762

Inactive
I currently have a DPMS Oracle (flat top/rail gas block). I am running a Eotech 517 HWS with a 5x magnifier. I have run out of real estate and can't put on my rear flip up sight. I need to slide everything forward but the delta ring is in the way. What I was looking for was any recomendations for any mid length free float quad rails. Something that won't require me to remove my gas block and will get the delta ring out of the way. Thanks.
 
How much crap do you have mounted on top of the rifle? Can't just move the Eotech one notch forward and mount the flip-up site?
Is front gas block a low pro, or an A2 style front site? (A2 style will need removed to mount the free float tube, then re-installed)
Not trying to be harsh, just trying to understand the need for a free float with quad rails to mount a rear site.
Picture of the rifle might be useful.
 
I will get some pictures soon. Yes I thought I could move it forward but the holo is right up against the delta ring. Move it beyond that and it's to far forward. What I'm looking to do is get the delta ring moved out of the way and I can move it the one slot forward. I know that most of the free float rail systems will sit snug up against the upper reciever rail thus making it one long rail system. My gas block also has a rail on it so I'm not 100% sure if it's low enough for a rifle length system. So I was asking if anyone knew of some systems that might help me out and was in the carbine length. Thanks for the replys.
 
The Omega rails have an extension over the delta ring, that basically merges with the flat top, if your looking to replace your current rails so you can mount your sight. Very simple to install also.
DD%2010001-2.jpg
 
You must log in or register to reply here.
Back
Top