Need help getting a double barrel to fire.

[ack24]

My dad has always wanted a sxs 10 gauge. Well someone gave me one that needed some work. I re blued it and refinished the wood and the outside looks great. But i aint that knowledgeable when it comes to sxs so i have no idea what i am doing. I tried dry firing it and it wont do that so i need some help on the inside. I hope this pictures will be good enough. It is a Zabala 10 gauge, Ive tried to find disassemble videos but no luck. Dont know where to go from here, also i would not like to take it to a gunsmith. Any help and i will be eternally grateful. Ill add more pictures at request.

thanks!

 

[big al hunter]

It won't fire....what does it do? The left barrel firing pin appears to be protruding. Will it move back when you open the action when assembled? Have you cleaned and lubricated the moving parts you can see? What did the previous owner say the problem was? How long did it sit without use?

 

[A400 Fan]

Where are the main springs? Are they broken?

 

[ack24]

I still have the two main springs but dont really know where they go

 

[A400 Fan]

Isn't going to fire without them in the gun. There should be two - one for each barrel......

 

[ack24]

I know i have both of them, i didn't try to fire it with out them in the gun..

 

[Virginian]

I know you don't want to, but I think you need a gunsmith.

 

[A400 Fan]

And not just some parts changer in a Gander, but one who KNOWS double guns and can make parts if necessaery