Need CZ75 gunsmith for trigger job

I would call Actions by T In Sugarland, Texas. Teddy Jacobson has one of the best reputations around and I understand his prices are reasonable.

You can reach him at 281-277-4008 or teddy @actionsbyt.com.

Good shooting.
 
I suppose any good smith can do the job. I prefer to find someone with ample experience working with CZs, however. The CZ75 trigger is a bit unusual and it's better to go with someone expert. I suggested elsewhere three possible alternatives for experienced CZ men. The first place would be www.cz-usa.com Their master gunsmith is very experienced with CZs and has done plenty of tuning jobs. Next would be Josef Dlask. An ex-CZ smith, he worked for CZ in the Czech Republic before setting up shop here in the US, Dlask is probably one of the most experienced CZ smiths you can find. You can find his info at www.pocservices.com/fvonline/dlask/ Lastly I'd consider Keith Whaley. He's also done quite a bit of work with CZs and their derivatives. He used to work out of Whaley's in Los Angeles and his last email address that I've got is keith9600@earthlink.net Not sure how to up to date that contact information is, however.

------------------
So many pistols, so little money.

[This message has been edited by Tecolote (edited June 18, 2000).]
 
Josef Dlask in Blaine, Wa. He use to be an engineer for CZ and got out after the fall of communism. He even makes a trigger replacement that changes the internal geometry and converts it to SA only. AN OUTSTANDING GUNSMITH, even on 1911's.
 
You must log in or register to reply here.
Back
Top