need a screw

N

nfernaays

Inactive
looking for a firing pin screw for a stevens 107b single shot 12 gauge..willing to pay top dollar...please post info and fee
 
sorry if the header threw some of yah off...realized it after i posted....and i am married:( checked www.gunpartscorp.com is out of stock its a strange screw its not fully threaded prolly going to have to take an existing screw to the shop and grind part of one down.
 
Have you tried flowers or a bottle of wine? Maybe a scented candle?

A tip: It's always good to start the evening off by asking how her day went. Sometimes they just want to be heard.
 
Last edited:
Well, it has to be really hard! I mean the screw of course, well, I mean...

Anyway, the THING acts as a firing pin retainer and can take a beating, so it should be fairly hard so it doesn't bend or you can't get it out. I do mean the firing pin screw, I really do.

Jim
 
To the OP: If you can find the screw, but are concerned about its hardness, just grind up one Cialis pill into a teaspoon of water and soak the screw in that solution. The screw will be hard for 36 hours, anytime you need it! :eek:
 
yim_rolling_on_the_floor.gif
 
What's the thread pitch and size (diameter) of the screw? You can probably find one somewhere and if you have this info it will be easier.
 
Finally got my screw

want to thank everyone for there help with my screw problem, firing pin screw i mean, actually found that a savage 25 firing pin screw works the same as the original, flowers helped too:D thanks everyone.
 
You must log in or register to reply here.
Back
Top