Hello. I put a Coonan Arms MOT-10 (5" barrel) 10 mm handgun on layaway, and am now shopping around for a compatible holster. I'll primarily be using this gun for hunting and range fun; therefore, I have no real need for a concealment type holster. I've found plenty of rigs designed around the Coonan 357 magnum, but I'm unsure as to whether these will be compatible with the MOT-10. Any information/advice will be appreciated. Thank You.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Need a Holster for a Coonan Arms MOT-10
- Thread starter WVinMN
- Start date
Areoflyer09
New member
I would ask Coonan if they have anyone lined for holsters yet, or wait until you have it in hand and can try it.
The 357 is just enough bigger than a standard 1911 that I wouldn’t count on the hamsters fitting the same. If you find a holster for a gov sized 1911 with rail, that may work with the full dust cover on the MOT10.
If the the MOT10 is as nice as the 357 is, I may be adding another Coonan to the line up!
The 357 is just enough bigger than a standard 1911 that I wouldn’t count on the hamsters fitting the same. If you find a holster for a gov sized 1911 with rail, that may work with the full dust cover on the MOT10.
If the the MOT10 is as nice as the 357 is, I may be adding another Coonan to the line up!
Response from Coonan Arms
Hello, thank you for your email.
You should actually find that any standard 1911 holster should work for your new 10MM. Just make note that we have extended controls, so depending on what type of holster you are looking for, that could come into play with what specific type you get.
Hopefully this answer was helpful.
Thank You,
Kristy
Coonan, Inc.
4501 103rd CT NE #120
Blaine, MN 55014
Ph: 763-786-1720
Fx: 763-205-2564
www.coonaninc.com
Hello, thank you for your email.
You should actually find that any standard 1911 holster should work for your new 10MM. Just make note that we have extended controls, so depending on what type of holster you are looking for, that could come into play with what specific type you get.
Hopefully this answer was helpful.
Thank You,
Kristy
Coonan, Inc.
4501 103rd CT NE #120
Blaine, MN 55014
Ph: 763-786-1720
Fx: 763-205-2564
www.coonaninc.com