My first fobus holster

R

ron8903

New member
Just got my first fobus paddle for my sig p230 its nice but it's a little tight
will it losen up with use? if not what will help it along
 
If it's leather, the way Milt Sparks suggests and the way I helped mine along was to take the thick plastic bag the holster was delivered in and wrap my gun with it, then holster it. I actually used two bags for extra thickness. When your gun isn't in use, just do this and leave it. It does help.

Just wearing it for a while you'll see marked improvement as well - takes some time...
 
Most Kydex holsters will smooth out a little (but not much) with use. If it is too tight after the WD40 trick you can use a hair dryer or heat gun to soften it up and stretch it out. Just take care and don't loosen it up too much.
 
Caz, is right I heated mine infront of a kero. heater and than put my gun in it
and since it was winter I placed it outside and it molded just right ......
 
You can adjust it

The Fobus holsters have a tension adjustment screw. It's on the side of the holster. Just loosen it and experiment with the retention strength.
 
When I first saw a Fobus, it was hate at first sight. Now, 4 of them later, I think they're the neatest thing since a zipper in pants. They're made for specific models of weapons, and they're supposed to be tight. That's their retention function. My dealer also suggested WD-40, but I've only had to use it a couple of times. In spite of how tight it is, I've found that a proper draw is both easy and fast, but you do need to draw straight out of it. If you try to draw at any kind of angle, it won't budge. Where you wear it is also important. Experiment with it at different locations on your belt to find where your "natural" draw is. If you want to change the tension to loosen it up, the test is whether you can hold it upside down without the weapon falling out. If it falls out, it's too loose. Can't beat 'em for twenty bucks!
 
I just got my first one a week ago, and it loosened up TOO much. After a dozen or so practice draws, I got a good solid feel for the right draw angle. not too long after that, it just seemed to just open up. I tip it upside-down and the piece drops right out. Any suggestions on how to tighten it back up? Retention seems to be achieved by pressure on the trigger guard. As there is no rivet at the back of that portion, the retrofitting of a screw is not feasible. :confused:
 
ron8903:
FWIW: I carry a SIG P232 also, but I use a Don Hume open top leather belt holster when wearing a jacket or shirt outside the trousers. In summer, I sometimes use a Kramer Confidante, which is a fishnet T-shirt with holsters under the arms.
Nice pistol.
JT
 
+1 on the "give it a while you'll get used to it" theory.

The intent of the fobus design is that only the person weraing the holster will be able to draw the pistol. As crazy as this idea seems - I am not a tinkerer...I figure that Fobus (or any other company) probably spent more money on R&D than I did so If It an't broke I don't want to F*%# with it.
 
You must log in or register to reply here.
Back
Top