Most Simple Gadget/Addition...?

J

JeepHammer

Moderator
We all have precision equipment, bought or made...

What is your most simple addition/upgrade?
From a rubber band here to a paper clip there...

Pictures if possible please...
 
I use a small vacuum to keep things clean....ebay tweezers to keep chunks out of the priming mechanism....I made a hook from a paper clip to install the primer slide return spring on my Hornady LNL! I also keep an optivisor with light handy.
 
Baseball cap brass catcher. Works great, especially on my Mini14 which launches brass into the next county.

23ebd6782d8fcc1e29ddfc8019a8cb31.png
 
This Pedestal Carousel made of 2 - 1 1/4in pipe flanges and one 10in (or 6"or 4") pipe (each fitting either NPT or NPS threads but do not mismatch) and a 7in x 1/4in aluminum (or wood or steel) disk. 7/8in holes drilled to accept desired number of PMs This stand picture was made of brass fittings because it's heaver but black pipe could be used. If the stand isn't going to be bolted down the pipe could be filled with lead if more weight is required. I haven't found either method necessary for my stand is quite stable.

The top flange's threads allow carousel motion thus any of the PMs can be screwed to the forward/backward position. An advantage of pipe threads adjustment ,to locate the PM's position, is rock solid stability, no tilting. This stand could be bolted to the bench but I've found that unnecessary thus making it easy to moved to some more remote part of the bench when not in use.

UBigGec.jpg
[/IMG]
 
An S-hook and a 16 ounce fishing bank sinker to replace the chain on my Lee Pro Auto Disc powder measure on a progressive press. NO more ball chain to deal with. I can take it off or install it in a few seconds.
 
Dropping washers on powder to help even out powder throws comes to mind.
A couple washers duct taped together, with a string to get them out, dropped on the powder in the tube helped to even out powder charges.
Some powders just don't meter well, this is a 'Trick' that is cheap, effective and helps with most powders that don't like being dropped.
 
In '90 when I first encountered military primer crimps, a simple counter sink worked quite well. Still does...
 
My two most recent !!

We all have precision equipment, bought or made...
What is your most simple addition/upgrade?
Click to expand...

I love to tinker and have made many tools. Well, I don't know about precision but will list two of my latest upgrades. :)

MADE;
Barrel wedge extractor tool for M/L's. Had some left over toilet bowl bolts. These are the ones that attach the water tank, to the bowl. They have a large slotted brass head. I ground a slot to form two claws that I can slip under the head of the wedge, for prying. I then ground the threaded end to a flat end punch that fits well into the escutcheon slot. When installing a wedge, I can also use the round head to help drive the wedge back in. ;)

BOUGHT;
When working on the bench, there are times when small parts, take flight. Tired of crawling on the floor looking for them so I bought a magnet wand and just sweep the floor with this. You can even head the part when it hits the magnet. Actually bought one for the back shop when I do my dirty work and one for the gun bench. On my first sweep of my back shop I found an old mouse trap and no, it was empty. …… :confused:

TJB101

I like your brass-catcher and now I have to remember to take two caps to the range. ….:confused:


Be Safe !!!
 
Last edited:
Baseball cap brass catcher. Works great, especially on my Mini14 which launches brass into the next county.
Click to expand...

That is out of the box thinking!

My best is using the gun range carts to haul sandbags down to hold up the targets.

Guy says, that's good thinking, I told him, you get motivated by things like a ruptured disk!
 
tangolima said:
Make sure nobody wears that cap. It is not good for you.

-TL

Sent from my SM-G930T using Tapatalk
Click to expand...


Did wash it out, thanks for the reminder ... it was my first attempt trying this ... it worked exceptionally well, even while standing ... a few fell out but at least they were straight down. Will dig a hat out that I can dedicate just for this usage
 
TJB101 said:
Did wash it out, thanks for the reminder ... it was my first attempt trying this ... it worked exceptionally well, even while standing ... a few fell out but at least they were straight down. Will dig a hat out that I can dedicate just for this usage
Click to expand...
It works all right. But beware of lead hazard. I saw people use their hats as baskets when they pick up their brass. Then they put the hats back on their heads. That's not good. Primer residue is compund lead. Pressing against bare skin and remain in the hair. Not kosher.

-TL

Sent from my SM-G930T using Tapatalk
 
Ball Cap is a great idea.. That lead thing is just pure …. what was I saying, hum, can't remember now... LOL.. Yeah be careful or just use a paper or plastic bag with a handle it should work he same..
 
I think the lead residue is more for punched primers. Little if any in the cap

It might kills some of us older guys in 500 years at worst. But then........
 
RC20 said:
I think the lead residue is more for punched primers. Little if any in the cap

It might kills some of us older guys in 500 years at worst. But then........
Click to expand...
One may get really sick before he dies. Do what you please. I go mind my own business.

-TL

Sent from my SM-G930T using Tapatalk
 
Since this is the reloading section, I took an old Kirkland dishwasher soap bucket and a $1 colander to sift my polishing/cleaning media. Colander sits perfectly inside the bucket for no spills
 
You must log in or register to reply here.
Back
Top