Had a nice day out today so me and my friend Andy broke out the powder coater and did a few different cast bullet coating test. This isn't all the different ones we did but all I had time to size and or add a gas check to. From L to R Lee 30 cal. 150 & 170 gr. RNFP sized to .311" checked some and left it off some others that I shoot for plinker loads. Lee .314" tumble lube RN some gas checked,some not. Lee 158 gr. plain base tumble lube SWC sized .359" and Lee plain base 9mm 124 gr. TC tumble lube sized to .358"
Plans are to load up a series of loads with each type bullet just to see how hard I can push them with and without a gas check as well as the non gas check versions. How soft an alloy I can use at higher velocity and pressure and last but not least which gives the best accuracy. Hope to add some more color's soon
Plans are to load up a series of loads with each type bullet just to see how hard I can push them with and without a gas check as well as the non gas check versions. How soft an alloy I can use at higher velocity and pressure and last but not least which gives the best accuracy. Hope to add some more color's soon