Moisture, BP and Synthetics
- Thread starter ZVP
- Start date
When I load percussion cylinders for my 1858, I place KY Jelly over each round and create an even, smooth cake of gel over the bullet with a cotton swab. Then after the cap is seated, I use KY or beeswax and seal the area around the cap and cone. I have carried these cylinders in drenching rainstorms and they fired with no problem at all. Loads were either with Pyrodex or my own homemade sulfurless black powder in FFFg equivalent.
I don't just load up a cylinder and shoot. When I load percussion cylinders, it is almost like an obsession. A very, very small amount of fine granulation black powder is loaded first into the chamber before the main charge to facilitate ignition and make sure the charge column burns evenly once fired. I only use a loading press on a level tabletop, and each 200 grain conical is treated to a light bit of file and knife to remove any burrs or imperfections, then it is seated into the chamber over the powder. Each chamber is meticulously sealed. Then the cone is charged with a nipple charger, cap seated, and also sealed and waterproofed. Only then, is the cylinder properly prepped for firing. Thats why I always carry at least 3 spare cylinders in percussion mode when out in the field
Then I discovered those newflangled metal cartridges, but I still prefer the old trusty cap and ball for big game harvesting
I don't just load up a cylinder and shoot. When I load percussion cylinders, it is almost like an obsession. A very, very small amount of fine granulation black powder is loaded first into the chamber before the main charge to facilitate ignition and make sure the charge column burns evenly once fired. I only use a loading press on a level tabletop, and each 200 grain conical is treated to a light bit of file and knife to remove any burrs or imperfections, then it is seated into the chamber over the powder. Each chamber is meticulously sealed. Then the cone is charged with a nipple charger, cap seated, and also sealed and waterproofed. Only then, is the cylinder properly prepped for firing. Thats why I always carry at least 3 spare cylinders in percussion mode when out in the field
Then I discovered those newflangled metal cartridges, but I still prefer the old trusty cap and ball for big game harvesting