jetinteriorguy
New member
I have an extra sizing die for 7.62x39 that I’d like to convert/modify to a body sizing die only, if possible. It’s a Lee die and I don’t have any machining tools or knowledge at my disposal and am wondering if there would be a way to accomplish this with regular hand tools/power tools. I already have the Lee Collet Neck Sizing die so I would resize as a two part process. I’d like to retain the ability to deprime at the same time so would just substitute a regular depriming pin for the expander ball. I was thinking possibly a shaft of some sort close to the correct diameter of the neck portion of the die and then just use valve grinding compound or possibly a dowel with 1000 grit wet sanding paper wrapped around it. I would chuck these up in a drill and spin them in the die. Any better ideas? Thanks.