maverick 88 trigger

P

pinecone

Inactive
has anyone managed to reassemble the triger assembly in the maverick 88? one of my mates was trying to be nice and decided to clean my gun and took the whole assembly apart, i have managed to put it all to gether except for the smallest spring thingy i have no idea where it goes.

as far as i can tell it still works fine, saftey, cocked, half cocked, and firing pin all work as normal.

any help on this would be helpful
 
Half cocked ? I think you may have a problem.
As far as i know there is no half cocked .As far as longarms go.On my Maverick trigger group the hammer is either fully rearward "cocked" or fully forward "fired position" there is no other inbetween position.
Now would be a good tme to call Mossberg !
As for the half cocked problem i would'nt even chamber a round let alone load the gun .
Get it checked !
Bill
 
im sure it is supose to have an half cocked i belive its to sop accedental fire if you dont fully cock it properly, anyway im going to take it into the shop to compair it to a new one if i cant figure it out ill send it to the gun smiths
 
i dont have a girlfriend so someone had to make up for it, he has offered to pay to get it fixed so im not to worried about it im busy playing with my sks anyway
 
head-in-hands.jpg
 
took it to the gunsmiths turns out the extra spring was from a different gun and i had it right all along, thats not bad considering i never saw it when it was together
 
mossberg shotguns have a half cock!

Yes there is a half cock. If you dry fire then open the action slightly then close and pull the trigger, the hammer will fall from the internal half cock position.
 
You must log in or register to reply here.
Back
Top