Marlin Model 80 DL not ejecting

[rcase1234]

I am fixing an old Marlin Model 80 for my grandfather that is not ejecting shells. After being shot this thing hold the spent case still in the bolt not "kicking" it out. And no it is not the ammunition. What do you think needs to be done? I was thinking just get a new style one piece extractor for it, two new plungers, and two new springs so that way I don't have to mess with anything else just Change it all and take the guess work out. But my question is could it be anything else?

 

[Blindstitch]

If it's what I think the hole that the shell goes in is out of shape and there is a reamer type tool that midway sells that can be spun in the chamber and clear things up.

 

[Blindstitch]

This is the tool I was thinking of.
http://www.midwayusa.com/product/777754/menck-chamber-ironing-tool-22-rimfire

If you were to push a cleaning rod from the muzzle is it hard to push the shell out?

 

[rcase1234]

What I'm saying is the spent shell is held in the extracter still when I pull the bolt back and I have to stick my finger in there to flick it out of the hold of the extracters on the bolt

 

[Blindstitch]

Ok so it's not stuck in the barrel.

The schematics for that rifle say it has an ejector
http://www.gunpartscorp.com/Products/402890A.htm

 

[Scorch]

The issue is the ejector. Replace the ejector or ejector spring or both.

 

[Picher]

I'm with Scorch. The ejector is either stuck, broken, or the ejector spring is broken.

 

[jrothWA]

Have you DETAILED IT?

Good cleaning might be the problem OR check the chamber for a "peening" of the edge (might show a "drag mark" on side of case. Then you need a tool that wipes the "peen" form the chamber wall.

The "peen" forms from too much "dry-firing" on a empty chamber.