Magazine help needed

M

msnden

New member
I am having a problem removing the magazine on my .22 CZ 455, the problem started all of a sudden, I have cleaned the magazine port. & magazine, I have tried both the plastic and metal mags. the action screws have been adjusted and set to the proper Torrance. Thanks for any & all advise.
 
T. O'Heir, Thanks, The mag, just does not want to come out, I think the latch is operating correctly, at first I thought something was blocking the latch from compressing completely, it would appear that is not the problem unless something is jammed behind it, (it wouldn't take much) later today I am going to pick up some compressed air and spray the "H" out of it.. Again Thanks for taking the time!!
 
Thanks Gary, I haven't removed the stock yet, but that is what is next. I had the stock off awhile back to set the action screws, I set them with a torque driver so I am assuming they are correct, I can loosen them a little, and see what happens, Thanks for taking the time.
 
You must log in or register to reply here.
Back
Top