ok finally went to the shop to get a new peashooter, the feg h-p i wanted was gone,the 9mm star 1911 after looking at the rough shape i passed on.in the corner i saw a Llama.45 plain jane 1911 style somwhere between a commander size and officers model in great clean shape with smooth walnut grips ,ahhhh the right price too,sold,i get home dissasemble and noted that some moron had done a crappy feed job on the ramp ,the surface not well finished at all so i cleaned that up.i took a nice look in the bore,oh joy!a crummy feed lip polish job too.so i clean that up.now the top of the chamber same deal,looks like a bad polish job to clean up.now the fun part.whose got parts? i am wanting to replace the barrel at this point because i just dont trust how much meat the dummy took from the chamber feed lip.case head separations scare ta hell outta me ,but the gunny has shot the piece ,worked fine then.maybe no jams now hopefully after the buffing job.i know i can use a colt barrel here but wondering how much hassle it is to fit it and details etc.or where can i get a stock barrel 4"5\16ths long thats llama? other than the botched home job did to it and repolished out as per normal by me the gun seems very tight,good machining etc and a nice trigger pull.has anyone got a stash of parts???????????seems a shame what some poeple do to a good weapon at times in the name of improvement.the bores rifling is exremely well sharp and almost new looking as well.