First we have stocks...there several MFR's known to me and a few used purveyors, but they're generally enough.
If anyone knows of a MFR that I've missed in the next posts, feel free to make a post below INCLUDING a LINK in the very least to their website...preferrably a Link and Picture of the product. Let's try to keep this "Sticky Worthy" and High in Solid Content. I also tried to list the Least Expensive price I could find for each item.
The Action of the Marlin 60 is basically the same as a Marlin 795...the differences start where the bullets load...clip mag or tube mag...so Bolt-On accessories are interchangeable for the OUTSIDE, but the stocks are Slightly different configurations.
Bear in mind that not all 60's are made alike, you have New style with LSHO, and old style without it. There are SLIGHT differences between the two, but nothing that can't be resolved with a little hand-fitting. Model 60/99/990
Same for the 70/795/995/7000...expect a little modification/pillar bedding to be required for a Perfect Fit.
New:
ATI Fiberforce stocks
http://www.gungarage.com/marlin_accessories.htm
For the 795, you cut out the magwell hole & fill in the magtube area with whatever you prefer. HAND FITTING REQUIRED.
BullpupGunStocks.com
http://www.bullpupgunstocks.com/
Model 60
Model 70 (have to remove material for LSHO for 795/995/7000)
http://www.bullpupgunstocks.com/graphics/stocks/marlin_70.gif
Butler Creek for model 70/995 (have to remove material for LSHO if used for 795)
http://www.cheaperthandirt.com/23943-1.html
Midway USA
Model 60 Grey Laminate, they do have other choices on their site
http://www.midwayusa.com/viewProduct...tNumber=954781
Model 795 Synthetic
http://www.midwayusa.com/viewProduct...tNumber=444233
NOS (New, Old Stock) & Used Stocks
Bob's Gun Shop http://www.gun-parts.com/marlinstocks/
ALL are MARLIN GUN STOCKS AND FORENDS , Bob's Gun Shop.Marlin Gun Stocks in Walnut and Synthetic Stocks. Marlin Semi Finish Gun Stocks, Marlin Rifle Forends, Marlin Lever Action Stocks and Froends, Marlin Antique Stocks and Forends, Marlin Synthetic
Numrich
http://www.e-gunparts.com/model.asp?idDept=158
I've been bugging the squish out of Richard's Microfit Gunstocks to get a specific line of THESE going...for the 795/60's...but I think it's going to take a lot more letters from a lot more people.
They can at present, be Special Ordered. But feel free to write 'em Richards Microfit Gunstocks
There are 9 million model 70/795's that would love an option of this nature.
http://rifle-stocks.com/silhouette.htm
However, since most 10/22 stocks, with some WECSOG bedding, would work for a 795, and with a lot more mods, would work for a Model 60. Judge for yourself if it is something you'd want to try to handle, but only the VERY experienced in Gunsmithing/stock fitting, IMHO, should even try.
That's the best of what I've found so far on Stocks
Oh, and don't forget Marlin.com for New Items...and a few oddball items that only the guys in Customer Service/Repair know about.
Hope this helps a few of y'all let folks know that there ARE accessories for Marlin 22's
If anyone knows of a MFR that I've missed in the next posts, feel free to make a post below INCLUDING a LINK in the very least to their website...preferrably a Link and Picture of the product. Let's try to keep this "Sticky Worthy" and High in Solid Content. I also tried to list the Least Expensive price I could find for each item.
The Action of the Marlin 60 is basically the same as a Marlin 795...the differences start where the bullets load...clip mag or tube mag...so Bolt-On accessories are interchangeable for the OUTSIDE, but the stocks are Slightly different configurations.
Bear in mind that not all 60's are made alike, you have New style with LSHO, and old style without it. There are SLIGHT differences between the two, but nothing that can't be resolved with a little hand-fitting. Model 60/99/990
Same for the 70/795/995/7000...expect a little modification/pillar bedding to be required for a Perfect Fit.
New:
ATI Fiberforce stocks
http://www.gungarage.com/marlin_accessories.htm
For the 795, you cut out the magwell hole & fill in the magtube area with whatever you prefer. HAND FITTING REQUIRED.
BullpupGunStocks.com
http://www.bullpupgunstocks.com/
Model 60
Model 70 (have to remove material for LSHO for 795/995/7000)
http://www.bullpupgunstocks.com/graphics/stocks/marlin_70.gif
Butler Creek for model 70/995 (have to remove material for LSHO if used for 795)
http://www.cheaperthandirt.com/23943-1.html
Midway USA
Model 60 Grey Laminate, they do have other choices on their site
http://www.midwayusa.com/viewProduct...tNumber=954781
Model 795 Synthetic
http://www.midwayusa.com/viewProduct...tNumber=444233
NOS (New, Old Stock) & Used Stocks
Bob's Gun Shop http://www.gun-parts.com/marlinstocks/
ALL are MARLIN GUN STOCKS AND FORENDS , Bob's Gun Shop.Marlin Gun Stocks in Walnut and Synthetic Stocks. Marlin Semi Finish Gun Stocks, Marlin Rifle Forends, Marlin Lever Action Stocks and Froends, Marlin Antique Stocks and Forends, Marlin Synthetic
Numrich
http://www.e-gunparts.com/model.asp?idDept=158
I've been bugging the squish out of Richard's Microfit Gunstocks to get a specific line of THESE going...for the 795/60's...but I think it's going to take a lot more letters from a lot more people.
They can at present, be Special Ordered. But feel free to write 'em Richards Microfit Gunstocks
There are 9 million model 70/795's that would love an option of this nature.
http://rifle-stocks.com/silhouette.htm
However, since most 10/22 stocks, with some WECSOG bedding, would work for a 795, and with a lot more mods, would work for a Model 60. Judge for yourself if it is something you'd want to try to handle, but only the VERY experienced in Gunsmithing/stock fitting, IMHO, should even try.
That's the best of what I've found so far on Stocks
Oh, and don't forget Marlin.com for New Items...and a few oddball items that only the guys in Customer Service/Repair know about.
Hope this helps a few of y'all let folks know that there ARE accessories for Marlin 22's
