Lee a-lox clean up! Go gone

D

dirtfisher530

Inactive
I have been using GO GONE and or ORANGE GLOW wood cleaner and polish!
Put a little bit on a old LUBE PAD or towel and then lay 10 or 15 cartridges down. Roll them around for a few seconds and set them aside.
Put more cartridges down roll them around. Go back to first batch and roll them on a old towel to remove A-Lox. Once you get a good system down you can clean a couple hundred cartridges in 20-30 minutes!
 
Are you cleaning the ALOX from the cases for a specific reason (other tan appearance) ?
I bit of it on the case will be no problem at all -- quite the oppposite.
 
dirtfisher530 just a question? are you getting that much Alox on your pistol cases from just seating the bullets. If so your probably using way to much Alox on your bullet.

Most new caster using the tumble lube method use way to much as all you need is a light golden sheen on the bullet I hardly ever have to clean out my bullet seating dies from buildup and it's never an issue having to clean cases.

Take a look at these post http://castboolits.gunloads.com/showthread.php?67654-Tumble-Lubing-Made-Easy-amp-Mess-Free or http://castboolits.gunloads.com/showthread.php?259285-NEW-!-!-T-L-Liquid-Lube You will like the results much better,faster drying time,less to no tack bullets as well as making your lube go a long ways.
 
Oh yes.... definitely use Ben's Liquid Lube (BLL). It beats the heck out of Alox! Everything is dry and non sticky afterwards and it lubes better than Alox. :)
 
You must log in or register to reply here.
Back
Top