LCP II Jams

D

Deepc

Inactive
So I've run one hundred rounds of Blazer Brass 95 grain FMJ through my new Ruger LCP II. I've had many ftf jams and two in the pipe jams. I also had one instance where the slide was locked back and as soon as I inserted a new magazine it cycled into firing position on it's own.

Anyone know what's going on with my weapon?
 
This isn't all that uncommon with the small .380s with moderate loads. The failures are likely due to short cycling.
I'd bet that with any sort of stout, defensive ammo will work just fine.
 
Well since it's a new LCP II i'd send it back. Ruger's got a pretty good customer satisfaction rating.
 
Would disagree with sending it back if you only tried one type of ammo through the gun.

My LCP has never choked on any self defense ammo but at least 2 brands of ball ammo has failures although all others work flawlessly. Some guns dont like some ammo especially small .380s.
 
Thanks but,

Thanks for the advice on the jams, but...
Does anyone know about the instance where I inserted a new magazine and the slide cycled itself?
 
Blazer Brass is generally good ammo. I'd try another brand and if issues persist send it back to Ruger.

The auto forwarding of the slide can happen on certain semiautomatics if the magazine is inserted with enough force. If it does it regardless of force I'd check if the slide stop appears to be engaging properly.


Sent from my iPhone using Tapatalk
 
LCP II Imporvement???
My trusty old early dash S/N Elsie Pea has been 100% reliable with everything I have fed it. Cheap, and lOW powered, or expensive, and more powerfull.
Sounds like you might have to have them take a look at your new modle LCP.
 
Try some different ammo but blazer brass ammo is decent. Make sure you have a good grip on the gun when shooting. You might just have to send it back but ruger has very good custom service. That said I have a lcp custom that runs like a top even though I'm not real accurate with it. :)
 
Deepc said:
Thanks for the advice on the jams, but...
Does anyone know about the instance where I inserted a new magazine and the slide cycled itself?
Click to expand...
That's not uncommon in semi-auto pistols; sometimes slapping the magazine home jostles the slide, releasing the slide stop and sending the slide forward.

Don't send the gun back to Ruger quite yet, none of the problems you're having are necessarily the gun. In my experience working at two different ranges, I'd say 90% of stoppages in small guns like the LCP are due to shooter error. The LCP is snappy and small, and it's harder to get a good shooting grip on it than with a bigger gun. Limp-wristing a gun like that is very common, I can't count how many times customers have come up to us and asked for the gunsmith because they're having stoppages, then one of us goes and shoots the gun and there are no problems.

Do you go to a range that has experienced employees? If so, try to have one of them shoot it using several different types of ammo. Many ranges have at least a few employees who are instructor-certified and are very good shooters who practice constantly, and if the gun still has stoppages when they shoot it (and it happens with different types of ammo) then it's more likely that the gun is at fault.
 
My LCP II has not given me a moment of trouble. My LCP Custom is in a shop for sale because I like the new one better.

Off topic, sorry folks. Theo, which shop do you work in?

Bart Noir
Who visits many gunshops in Western Washington.
 
Given Ruger's recent problems with quality control, you might have a bad gun.

I would, as others suggest, try with at least 3 different brands of U.S. spec ammo. Ruger will ask what you've run through it when you contact them, and they emphasize use of U.S.-specification ammo. If you can say it has malfunctioned with 2 or 3 brands, they shouldn't give you much argument at that point.
 
Mosin44az said:
I would, as others suggest, try with at least 3 different brands of U.S. spec ammo. Ruger will ask what you've run through it when you contact them, and they emphasize use of U.S.-specification ammo. If you can say it has malfunctioned with 2 or 3 brands, they shouldn't give you much argument at that point.
Click to expand...
If he's limp-wristing the gun then this won't help at all. Make sure to also have a highly experienced shooter shoot the gun.
 
OK, check for limp-wristing, though I don't find LCPs are sensitive in that regard.

I do know for a fact that Ruger will ask what ammo was run in the gun, as I indicated.
 
What a piece of junk. Just another reason for me to stick with my Makarov PM.

20160605_212141_1_1.jpg
 
Sorry, but I'm a product tester for no one.
Click to expand...

Okay. Quality control is a thing. I've owned pistols from every modern manufacturer and some that no longer exist. I've seen issues with every modern manufacturer and some from those that no longer exist. Every company can make a lemon, some more than others it seems, but these things happen. Heck I'll even bet that back in the glorious days of the Iron Curtain and the USSR even one Makarov made it off the line that had an issue (though Ivan was likely sent to Siberia as punishment, or in your case wherever is the worst part of Bulgaria).

For the record I don't have an LCP so I don't have a dog in this fight.

I'll stay with my tried and trued Makarov for the time being.
Click to expand...

I don't have anything against the Makarov. The 50s were pretty swell.

http://fiftiesweb.com/pop/inventions/

The Makarov has the advantage of very few parts meaning there is less to control (blowback pistols do have that advantage). But if we tossed out every make and model where we found bad examples there would literally not be any firearms left for us to use. So calling something "trash" because of a bad example is to me being a bit hysterical.
 
Last edited:
You must log in or register to reply here.
Back
Top