latest holster - '58 Remington target crossdraw

B

BConklin

New member
Just finished this one last night. I made it from my own pattern for my Uberti target model 1858 Remington with 8" barrel. It's 8 oz - lined with calfskin and hand stitched throughout - no rivets.

I like the effects I'm getting with the contrasting edges but I admit it looks better in person than it does in these photos. Without that mirror sheen you get from the dark leather behind the gloss it looks as if it's been dented and chopped up - when in fact it's quite smooth - but the color is mottled as it's just the raw leather.

I also like the color I got mixing tan and oxblood on the outside - and contrasting it with the diluted tan of the liner. I'm not crazy, however, about the single line of stitches in the back to hold the hammer strap - it looks like a repair or something. My reasoning behind it was that I didn't want a larger piece of leather inside the holster which might interfere with the gun coming out or going back in. Next time I think I'll make the hidden end of the strap into a paddle shape.

I'd appreciate feedback from those who have more experience with holsters - whether making them, or just carrying them in the field.

DSCF4407.jpg

DSCF4408.jpg

DSCF4409.jpg

DSCF4410.jpg

DSCF4412.jpg

DSCF4423.jpg
 
Just curious, why did you select calf skin for lining? Very nice job. As you found (I'm certain) there is a lot more involved in making a nice holster (like the one you made) than anyone who has not been there done that could begin to imagine. Once again, nicely done.
 
Thanks all!

rd - a couple of reasons - first and foremost, I liked the look and feel of the piece of calfskin I bought..it's like silk. Second, it seemed like the right thickness to pair with the 8 ounce cowhide I had. Third - it's veg tanned, like the cowhide.
 
OK, that makes sense. If you ever get a chance give pig skin a try. It's a bit of a pain to work with, but grips the weapon very well and wears like iron, also is easy on the finish. If I remember, I post a pic of what happens during long winters in the "Hills". Keep up the nice work.
 
BC;

As you can see, there isn't much else to do here in the Hills, especially when the temp is 15-20 degrees below zero and colder. It got cold here about two week ago, and this is the result.
P1010005.jpg
 
niiiiiice!

I just popped a concealed carry holster for a mod. 1935 Beretta in the oven after wet forming it. Cute little thing - fits right in the small of my back. It's my first piece that will depend on the leather to grip the gun without any straps ...we'll see how it turns out.

pigskin grips the gun well, eh? thanks for the tip. With the hunter holsters I've made so far that hasn't been a concern
 
very nice.

i didn't think leather work was difficult until i made the belt ends for a 3" wide jute cartridge belt for 32, 45/70 rounds,

luckly my friend next door is into leather & he had all those nice stitch markers & punches plus a stitching poney. i decided to use it after stabbing my finger and hands a few times.

your holster is excellent, to nice for the worn trail look my friend & i needed for our historial persona.

my friend made four holsters also the same lines but more contoured along the bottom /load leverl side without the border stitching.

he traced the gun out real close. cut, sewed it, then wrapped the gun in plastic food wrap wet the leather then pushed the gun into the wet sewn holster.
after a week of drying and alittle oil it works real nice.

s.m.
 
Last edited:
You must log in or register to reply here.
Back
Top