Kimber CDP II Magazine Adjustments

G

GorillaGunworks

New member
Hey guys i just uploaded Part 5 of the Kimber Project where i explain how to adjust magazine feed lips and correct feed angles. these adjustment help to correct common failure to feed issues. I hope this helps some of you out, and if you like the video hit the subscribe button on the channel. i appreciate all the support thank you guys.

https://youtu.be/7Zg5LMQaDu0
 
It was interesting. However the collet of your bullet puller was being used upside down, the domed side should be towards the nut which has a slight bevel so it tightens on the case. Removing the primer was interesting as well and would not ever do it in such a violent way, driving the anvil against the primer charge wafer with the punch against the cup with a hammer could cause firing. Whether the lip spreading was a fix is questionable as well. This type of mag has the release point, parallel or slightly narrower than the back, this helps to resist inertia feeding, so would find live fire after relaxing the lips to be required to see.

LOG
 
Yes Log man you are correct i had the collet on backwards, lolz good catch. its tough trying to keep your train of thought while filming. i thing i repeated the steps a few times to get the video correct. and as far as the primer, WD-40 deactivates the primer you can smack it as hard as you want that it wont go off.
 
The video does not indicate the primer was deactivated, nor does it look like anything was done besides driving the primer out, others not knowing what is safe and isn't, won't have a clue.

LOG
 
log man said:
The video does not indicate the primer was deactivated, nor does it look like anything was done besides driving the primer out, others not knowing what is safe and isn't, won't have a clue.

LOG
Click to expand...
You are correct Log_man my fault i should have stated the WD-40 to deactivate the primer. i am new at the whole video thing it is a learning process. i will keep these details in mind for the future. Thank you for the input brother.
 
You must log in or register to reply here.
Back
Top