Keres Dynamic Sig P320 Flat Triggers

[Mackie244Bud]

I recently came across a Keres Dynamic Flat Trigger for my P320.

https://keresdynamics.com/default.aspx

Keres has 2 Flat Triggers:

* Pro Adjustable that uses set screws to set Takeup and Reset.

* Pro Action drop in Flat Trigger shoe.

I thought about
*Grayguns
* Apex
* Sig
* Keres

I ultimately went with a Keres Dynamice Pro Action (non adjustable) Flat Trigger.
Free Shipping and I had the Trigger in 3 days.

Easiest way that I have seen to drop in a Trigger:

At 9 minutes into the video he shows replacing a P320 FCU triggers without removing the Trigger Bar or Spring.

https://www.youtube.com/watch?v=6_-vUbmFlvA

At 6 minutes into this video is a review of the Keres Dynamic Pro Adjust trigger.

https://www.youtube.com/watch?time_continue=370&v=aylT_wkCp-U

I went with the Pro Action which is without the adjustments.
Not doing competition and primarily EDC I did not think that I needed it.
The P320 already has little takeup so if I adjusted the trigger then maybe on the reset..
But I really like how the Pro Action trigger feels.
I like the thinness of the trigger when compared to Sig's fatter flat trigger.
I wish that Keres made one for the P365, I think that would be a really nice match.
Maybe later on down the road.
The ridge feels nice too like it holds my trigger finger perfectly secure to the trigger.

View attachment 9813



First range day with it is tomorrow.

Just thought I'd share in case others are looking at Triggers for their P320's.
Keres Dynamic's offers another option.

 

[1stmar]

Did u measure trigger weight before and after?

 

[sparkyv]

Look forward to a range report, Mackie244Bud.

 

[precision_shooter]

My P320 X5 has the flat faces trigger. I like it. Has a good feel. Trigger pull is a little long and reset is also a little longer than my Glocks, but overall it’s a decent trigger.

 

[Skans]

I have a question about the Pro Adjust Trigger for the SIG X-Five. I purchased the X-Five competition years ago. It is identical to the Level 1 X-Five, except the trigger is not adjustable. Does anyone know if this particular trigger will fit in an X-Five Competition model? If so, this may be exactly what I've been looking for.

 

[Mackie244Bud]

Here is a Keres Dynamic Adjustable Trigger in a X-Five:

https://www.youtube.com/watch?v=jH4apNgPXEw

Keres Adjustable Trigger Install:
Though I would use the method shown in my first post about the easiest way to install a trigger...
There is No need to remove the Trigger Bar or Spring as shown in this video..
This video is good for the Set Screw adjustments

https://www.youtube.com/watch?v=H6RTYI8rebs