Jags for cleaning

P

pdmoderator

New member
Hi, all,

I'm having a very stubborn fouling problem with a HK USP .45, and am looking at trying some sterner measures than just brush-solvent-patch-repeat until exhausted. :(

Has anyone here used jags to clean handgun barrels, especially polygonal barrels? If so, what kind of results did you get?

Thanx,
- pdmoderator
 
I use a jag with a doubled shotgun patch after I brush to be sure and remove all the fouling that lays in the grooves by the shoulder of the land.

I never use the patch holder, it doesn't evenly swab the barrel in my opinion, I would never be done cleaning if I used that stupid thing. The only barrel I use the patch holder in is a .22. I strictly use the jag in my .45ACP.

Cheers,

SB
 
I prefer BMWs, especially the 80s models. THe square edges scrape the gunk better than the smooth lines of the jags.

Especially when cleaning my Benedict & Arnold 629.



:D
 
You think YOU got a barrel cleaning problem? My Para came from the factory with grooves that were chain-saw cut and had lead ammo fired into them!

Here's the deal: using a NYLON .45 bore brush, dip it in automotive chrome polish and scrub the bore. It's not abrasive but takes out fouling really well. Run patches through and inspect.

If there is still some fouling you can't get: the ultimate weapon is J+B Bore cleaner. There is no substitue. Rub it into the patch and pump the bore. It gets out dirt even when the bore looks clean and shiny.;)
 
I only use jags in my rifles. I use bronze brushes and wrap patches around worn ones. JB is awesome for stuborn problems. Also use the proper solvent. I use to have a hard time with lead in my 44mag and 45/70...I was using a copper solvent. I let the chemicals do most the work.

tjg
 
You must log in or register to reply here.
Back
Top