Introducing, the MP 312-159

B

Beagle333

New member
This week, I tried out my MiHec HP mold, the 312-159. It casts pretty well with 70/30 Pure/Coww and 2% pewter. Yes, I ran them a little soft. I want to see how soft the GC's will let me shoot, and I want to get the HP to stay on the front of it, if I can. Anyway, they really started dropping at 740 degrees and I think they are a wonderful looking boolit. I'm going to run this one through the 30-30. The nose drops at .302, so it will need just a touch of sizing, but I have a Redding sizer bushing coming this week so I should be able to nose-size the first 1/3 of it to .300 fairly easily.
Anyway... it looks like fun. The crimp-to-nose length is exactly the same as the 311291, and that one does chamber in the Win 94 at a .301 diameter. There just won't be nearly as much in the neck as with the 291. :D
308001_zpsecaa7c28.jpg

308008_zpsa6ddb3a0.jpg
 
OOOOOH, PRETTY! Try 7gr. of that Red Dot I know you have on the shelf. It should put you in the neighborhood of 1300fps and feel like a .22lr on the recoil. Max is 9gr. for about 1450. With your softer alloy you should do just fine, and the tin you added should keep the nose together in the 7-8gr. range pretty well--looks like a pretty stout nose. If it holds together through the Red Dot range and you want to push it faster, switch to H335 starting at about 15gr. and work up. That will pick up the velocity curve where the Red Dot left off. You won't hit max charge on H335 till about 30gr. but that's a jacketed bullet load by that point. I've run lead through 22gr. with a clean bore, and you're hitting upward of 1800fps+ before that point (too much for a cast HP by then anyway). That is gonna be a FUN boolit to develop!

BUT, you DO realize you're going to be expected to post results of that boolit, too--right? You can't post something so pretty without following up with what it can do! :D
 
Hey hey! They chamber as cast! I'm in business! (And you're right, I still got 4 lbs of RedDot that I haven't broken the seal on.) :D:D

308009_zpsb2bd5bc7.jpg

308010_zpsa7b7edb1.jpg
 
Last edited:
What are those gouges on the bullet? Will they effect accuracy?
Click to expand...
That's from contacting the rifling when he chambered it. Not only will it not hurt anything, but it's generally beneficial to have that contact (better accuracy and consistency).


Beagle, those look pretty tasty. I'll have to see if I can get my hands on a few for my Marlin 336.
 
Not going to say that this will be the case with your barrel, but in general I have found those that take a little to lube, usually have less of an issue settling down so to speak, if I run a patch swabbed down good with alox through the bore prior to shooting. Once I get a couple through it is no issue. Just sort of a conditioning prior to the first lead traveling down the bare tube.

Just one of those little things I have found that works out great. Oh and that was a tip from a fellow who has plenty more experience than I do with cast.
 
You must log in or register to reply here.
Back
Top