Interarms Mark X 30-06 Bolt Help

T

trott

Inactive
Need help please, i have a Interarms Mark X 30-06 and i have been told it is built like a Mauser. I am having a hard time getting the bolt stripted & disassembled. It does not have the safety on the end of the bolt like a regular Mauser. I can not get the bolt sleeve off the cocking piece, i did get it to turn about 1/4 turn and it seemed to relax it somewhat by pushing the bolt sleeve catch pin in to turn the sleeve but that is as far as i can get it. Any help would be appreciated. Thank you, Trott
 
Try you tube for Mauser bolt dis-assembly . The video will be better that me trying to type step by step. Its simple once you see how.
 
There is a small hole in the cocking piece at the back of the bolt. Remove the bolt from the rifle and slip a 1/16" allen wrench or a small nail into the hole. Then depress the bolt plunger and unscrew the bolt shroud. Clean as desired. Reassemble in reverse order.
 
You must log in or register to reply here.
Back
Top