inline rifle sabots

T

troy_mclure

New member
i have a knight wolverine inline rifle.
a while ago i picked up a pack of sabot's for it. i didnt notice till today that they are for .45 to .50.
i shoot normally .44 to .50.

i tried loading one up to see how it fits, it still fits tight in there, and the bullet didnt come out of the sabot, even with some banging.

do you think it would be safe to shoot to see how it affects the accuracy?
 
do you think it would be safe to shoot to see how it affects the accuracy?
Click to expand...

From your description, yes I do think that it's safe.
But none the less, I would be extra careful after loading the sabot containing the undersize bullet by not pointing the muzzle downward to give the bullet any chance of slipping.
I guess the bullet could be shimmed/patched, but that might hinder the bullet's trajectory and release.
However in theory, if the bullet was just a tiny bit looser then the sabot may release it easier and with more consistency after exiting the barrel.
It will be interesting to hear if the bullet shoots as accurately or not though.
Please let us know. :)
 
Yes it would be safe to shoot and yes, the accuracy will be effected depending on your shot string. Sabots are not all that expensive and you might try to trade them off. I mostly shoot 44/50 and some 45/50. Heck, if you have some 45's sitting around, shoot them in the 45/50's. Forget about the shimming but play with it if you wish. I can assure you that you are not the first or the last person to fall into this trap. I know I have and even tried a .45 in a 44/50. just a bit tight and the sabot will let you know about it ...


Be Safe !!!
 
I've found in my Knight USAK (identical barrel to the Wolverine) that the .45cal bullets tend to be more accurate anyway - that may well be because I shoot the heavier bullets in them. You might can get decent results with the .44's in the .45 sabot - but the tighter the sabot, typically the more accurate the bullet. But as Articap said, as long as you don't dislodge the sabot from on top of the powder - it'll be safe to fire.

I would say, if you can find some of the .45cal Hornady XTP Mags (50 to a box) get them and try them in those sabots. That combination over 80gr of 2fg 777 powder is my benchmark load. They are very accurate and any combination that comes close to them is a definite keeper.
 
im using rainier ballistics 300gr plated hp over 2 50gr pyrodex pellets.

its great to 100, decent to 150, at 200 i can hit a 5 gallon bucket, but im not comfortable shooting game with it at that range.
 
been there done that. then i purchased a .50 cal lee real mold. made a bunch of bullets then lubed them with bore butter. Ever since then i have not looked back. i still have a few of the sabots. as soon as i finish shooting them off i will be sticking to the .50 lee
 
You must log in or register to reply here.
Back
Top