In praise of the CZ75 40

R

Rogervzv

New member
I have two (2) identical CZ75B 40 S&Ws, and just thought I would post my impressions after putting about 500 rounds through each of them.

Had a trigger job done to them by West Coast Gunworks and the difference was remarkable. I will shortly post the poundage after the work.

I also replaced the stock sights with the Meprolight Tritium sight. I don't know why CZ does not make this standard as it really is much better.

This adds maybe $175 to the price of the gun. However, I defy you to find another quality all-steel semi-auto as inexpensive as the CZ75B, so you are starting at a low price base and ending up with a heck of a good pistol.

Two noteworthy traits of these guns: accuracy and reliability. Neither gun has ever had the slightest malfunction. Both always lock back after the last round, and neither has ever had a FTF, stovepipe, or anything like that. I mainly shoot range ammo sold by FT3 tactical although I put a box or two of Federal through each of them too. The design of this gun seems to be hyper-reliable.

Accuracy is great. These guns will shoot as accurately as the shooter allows. I do not own a pistol rest such as a Ransom, but at ten yards I can mostly hit the Bull's Eye or near it most of the time. The Range Officer at FT3 (my local range) came up to me and asked what I was shooting last Sunday when he saw my ten yard groups. All flyers were strictly due to the shooter (me). I'm not saying that this gun will equal say, a Wilson Combat 1911, but it will shoot very accurately.

Lastly, disassembly and reassembly. The easiest of any semi-auto I own.

One downside: detail stripping a CZ is *much* more difficult than with a 1911 and is not for the faint of heart. Generally it is considered not necessary by CZ aficionados over at the CZ forum.

Anyway, these are my impressions after owning these guys for awhile.

 
My CZ75B Tutone in .40S&W was one of the prettiest guns I ever owned but it never ran right for me, just a horrible gun where it really counted. My plain Jane 75B 9mm is the exact opposite, as reliable & accurate as the day is long. I'm sure mine was just a bad apple, I'm glad to hear that your .40 S&W 75B is working out for you, though.
 
Nice pistol. I've had two Pre-Bs and a Retro B model. I've always thought the CZ75s are a very good value for the money. I did not find my CZs to be especially accurate, but they did demonstrate flawless reliability with any factory or reloaded ammo I used. One of the few guns with a grip that fits me more comfortably than the FN/Browning Hi Power.
 
CZ's are very accurate, and reliable pistols. I have a 75B, 75 pre-B, 75D PCR, 97B, Kadet pistol, and Kadet Kit. All have good, stock triggers, and are among my favorites, even beating out my venerable MK III Browning Hi Power.
 
I've got 2 75B's, a stainless 9mm and a duotone .40. I'm very fond of the guns, and I can shoot them well so long as I am slow and deliberate. I can understand why the OP had a trigger job done on his 75B, though, because the OEM triggers on both of these guns stink to high heaven. They are easily the worst triggers of any semiauto of any caliber that I own, and that's quite a few. They have an exorbitantly long and gritty takeup, and the hammers visibly "cam" backwards before they break.

I have learned to adapt to them only because I have a distaste for spending money to fiddle with new guns (with the exception of undesirable finishes), so long as they work. I have no intention of selling them, though, because they are well made and accurate, the controls are in the right place, and they fit my hand perfectly.

I have detail stripped them, but, as the OP said, it is not for the faint of heart or the impatient.

IMG_2884.jpg


CZ75B403.jpg
 
How does the CZ75 "Pre B" differ from the B?
Click to expand...

The Pre-B has no firing pin block, a rounded trigger guard, no dovetailed front sight, and spur hammer. It will also say made in Czechoslovakia, not Czech Republic.

I slightly prefer my Pre-B over my 75B, mostly due to aesthetics. They are both great shooters.
 
Pilot said:
The Pre-B has no firing pin block, a rounded trigger guard, no dovetailed front sight, and spur hammer. It will also say made in Czechoslovakia, not Czech Republic.

I slightly prefer my Pre-B over my 75B, mostly due to aesthetics. They are both great shooters.
Click to expand...

There are other minor differences, including how the safety mechanism works (and the two designs are not compatible if the pre-B is an early pre-B.) Some of the earliest pre-B had a spring inside the safety lever, and that spring must be controlled when removing the safety (use a pin to control it.) Those spring are made of unobtanium -- and you may not be able to find a replacement, so be careful. (You can't use the newer design safeties in these older guns.)

The pre-B uses a firing pin STOP (a plate that slides into the rear of the slide) to retain the firing pin, and the B uses a firing pin retention roll pin -- a less expensive approach.

More importantly, the firing pin block mechanism adds some extra springs and levers to the trigger pull process, and it changes the feel a little. (Many serious enthusiasts remove the firing pin block mechanism, but that requires some adjustments in the mechanism.) Polishing the firing pin mechanism may offer enough improvement that the firing pin block can be retained; the 75B SA I once owned had that improvement, you couldn't really tell that the firing pin block mechanism was still installed when pulling the trigger.

The Tanfoglio firing pin block design is an improvement and seems to have less effect on the trigger pull.

Most untuned pre-Bs have better triggers than most untuned B models, but they all smooth out with use. The B series, at least the newer ones, have a "camming" motion in the single action hammer, in which the hammer moves a bit to the rear before it drops.
 
Great info on the "pre B" CZ75. Thanks! I am going to guess that the pre-B use of a firing pin STOP makes it easier to detail strip the gun, at least to remove the firing pin. Like a 1911?
 
Rogervzv said:
I am going to guess that the pre-B use of a firing pin STOP makes it easier to detail strip the gun, at least to remove the firing pin. Like a 1911?
Click to expand...

Yes. But everything else about the CZ is a bit more complicated than a 1911. :) It arguably comes from the fact that it's a DA/SA weapon that can also be started from cocked and locked. (The decocker models are almost the same, but slightly more difficult to detail strip.)
 
Last edited:
You must log in or register to reply here.
Back
Top