Hone cylinder in a Charter Arms pathfinder 22 lr

J

Jambuster

Inactive
Well I am having trouble ejection spent casings and I was thinking about trying to hone the cylinders. I was going to do this with some JB bore paste and a 22 cal mop or patch. I was just going to rotate the ramrod by hand but I could chuck it up .

If this is not a good way to do it let me know and suggest a good method.
 
Doing that should be the last thing to try. It's far more likely to be nothing whatever to do with the cylinders. More likely the ejector has a burr or needs a bath.
J B Bore Paste is for cleaning not polishing anyway.
 
I did that exact thing with an old H&R revolver,,,
The thing required me to "tap" the ejector rod on the bench to eject cartridges.

About 30 seconds per chamber using a generic electric drill fixed the problem.

Aarond

.
 
You must log in or register to reply here.
Back
Top