George Stringer
Staff Alumnus
I replied to both of your e-mail addresses and both bounced. At the risk of being commercial I'll post the info here.
The extensions are $110.00 ea with the Clark barrel band, $73.00 ea with a
Choate barrel band and $65.00 ea without a barrel band. Prices do not include shipping. (Add $3.20) So far the only bands I've used are the Clark. They
work real well for giving extra support. Especially if you are considering
a Tac Light etc. I can't really say how good the Choate works. Also a
couple of guys have had me drill and tap the end cap for a sling swivel
stud. If you want that add $12.00. The finish will be Matte Black Teflon.
I need the distance from the front of the barrel ring that supports the mag tube to the
muzzle. That way if you have a 24" barrel you don't wind up with an
extension for a 28".
If yours will be more than 8" long I recommend a Wolff mag spring. They come
in 40" lengths and can be cut to the length you need. An 8" or less
extension will work fine using the stock mag spring.
Another thing I should mention is that I only make these as they are ordered
so I don't have any just to box up and send. You need to allow me 3 to 4
weeks for delivery.
If you'd like to have an extensions just send a check or money order in the
full amount along with a note to remind me what you're ordering to:
Stringer Gunsmithing
501 W. Main St.
Earlington, KY 42410
Thanks,
George
The extensions are $110.00 ea with the Clark barrel band, $73.00 ea with a
Choate barrel band and $65.00 ea without a barrel band. Prices do not include shipping. (Add $3.20) So far the only bands I've used are the Clark. They
work real well for giving extra support. Especially if you are considering
a Tac Light etc. I can't really say how good the Choate works. Also a
couple of guys have had me drill and tap the end cap for a sling swivel
stud. If you want that add $12.00. The finish will be Matte Black Teflon.
I need the distance from the front of the barrel ring that supports the mag tube to the
muzzle. That way if you have a 24" barrel you don't wind up with an
extension for a 28".
If yours will be more than 8" long I recommend a Wolff mag spring. They come
in 40" lengths and can be cut to the length you need. An 8" or less
extension will work fine using the stock mag spring.
Another thing I should mention is that I only make these as they are ordered
so I don't have any just to box up and send. You need to allow me 3 to 4
weeks for delivery.
If you'd like to have an extensions just send a check or money order in the
full amount along with a note to remind me what you're ordering to:
Stringer Gunsmithing
501 W. Main St.
Earlington, KY 42410
Thanks,
George