Help with trigger job please

[handgunfan101]

Ok,

I just had my M&P Shield cerakoated (orange and black) but i need to fix the shields shortfall the trigger pull. Its very heavy and it seems grainy. I purchased 2 different kits from two different venders and they wont even work for that gun and i cant return them.

Any info would help and i would appreciate it a bunch. I cant afford to keep buying kits that wont work..

Thank you all in advance

 

[Dixie Gunsmithing]

These guns are striker fired, so a trigger job is different. The first photo shows the sear at the back of the frame, and it's the silver plated rectangle. The rear would have to be smoothed with a stone, while keeping the correct angle. The plating could be causing the grainy feeling.

The second photo shows a parts breakdown, and the third, a striker assembly. The piece on the end, circled with red, would need to be smoothed also, with a stone.

There's not a huge amount you can do with these.


MP1 by matneyw, on Flickr


MP2 by matneyw, on Flickr


MP3 by matneyw, on Flickr

 

[handgunfan101]

thank you i may try an apex kit i found online

 

[Roughedge]

I installed the Apex kit in a customer's gun and he loved it.

 

[Wreck-n-Crew]

so a trigger job is different.

Amen.

I installed the Apex on my SD9VE and it made a world of difference. I did some "buffing" while I was there to complete the trigger job and I love it!


http://www.midwayusa.com/product/46...-s-and-w-m-and-p-9mm-luger-357-sig-40-s-and-w

The installation video link is right below the image of the kit. Might be helpful.

 

[Old Stony]

I tried one of the Apex kits on a M&P 9mm pro and it made an outstanding difference. Be sure to watch a video of it first for tips, but it's not too difficult. I wish S&W would fix some of the action problems on their M&P's and we wouldn't have to go through all this.

 

[jkpq45]

I'd like to see that orange/black combo on the Shield. Sounds good.